FLEXURAL AND AXIAL COMPRESSIVE FAILURES OF THREE-DIMENSIONALLY BRAIDED COMPOSITE I-BEAMS.

被引：25

作者：

Yau, S.-S. ^{[1
]}

Chou, T.-W. ^{[1
]}

Ko, F.K. ^{[1
]}

机构：

[1] Univ of Delaware, DE, USA, Univ of Delaware, DE, USA

来源：

Composites | 1986年 / 17卷 / 03期

关键词：

FAILURE ANALYSIS - PLASTICS; REINFORCED - Testing - POLYESTERS - Structural Application - STRUCTURAL ANALYSIS;

D O I：

10.1016/0010-4361(86)91006-2

中图分类号：

学科分类号：

摘要：

Three-dimensionally braided composite I-beams have been loaded in four-point flexure and under axial compression. Linear stress/strain behavior up to the point of initial failure was observed in the flexure tests. Both tests provided consistent data for compressive moduli as well as good resolution for the characterization of damage initiation and propagation. The absence of delamination observed in the three material/geometry combinations for the composite I-beams compared with conventional laminated composites demonstrated the inherent through-the-thickness reinforcement of the three-dimensionally braided composites.

引用

页码：227 / 232

共 50 条

[21] Effect of exposure energy dose on lateral resolution and flexural strength of three-dimensionally printed dental zirconia
Radomski, Kyle
Lee, Yun-Hee
Lee, Sang J.
Yoon, Hyung-In
JOURNAL OF ADVANCED PROSTHODONTICS, 2023, 15 (05): : 248 - 258
[22] Design of braided composite cardiovascular catheters based on required axial, flexural, and torsional Rigidities
Carey, J
Fahim, A
Munro, M
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2004, 70B (01) : 73 - 81
[23] A Procedure for the Numerical Determination of the Strength Criterion Parameters of a Three-Dimensionally Reinforced Composite Material
Morozov, A. V.
Lvov, G. I.
STRENGTH OF MATERIALS, 2024, 56 (01) : 53 - 61
[24] Three-dimensionally ordered macroporous metal oxide-silica composite for removal of mercaptan
Yang, Chao
Wang, Jian
Fan, Hui-Ling
RESEARCH ON CHEMICAL INTERMEDIATES, 2017, 43 (07) : 3847 - 3858
[25] Synthesis and characterization of composite membrane with three-dimensionally ordered macroporous polyimide matrix for DMFC
Yamamoto, Dai
Munakata, Hirokazu
Kanamura, Kiyoshi
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2008, 155 (03) : B303 - B308
[26] Three-Dimensionally Printed Stretchable Conductors from Surfactant-Mediated Composite Pastes
Lee, Hoi Sung
Jo, Yejin
Joo, Jong Hoon
Woo, Kyoohee
Zhong, Zhaoyang
Jung, Sungmook
Lee, Su Yeon
Choi, Youngmin
Jeong, Sunho
ACS APPLIED MATERIALS & INTERFACES, 2019, 11 (13) : 12622 - 12631
[27] Microstructural modeling of three-dimensionally full five-directional braided composites based on a new multiunit cell scheme
Xu, Kun
Qian, Xiaomei
JOURNAL OF INDUSTRIAL TEXTILES, 2016, 46 (02) : 388 - 416
[28] Integrating GPR and EMI to three-dimensionally reconstruct a WW I training trench at Stonehenge
Saey, T.
De Smedt, P.
Van Meirvenne, M.
PROCEEDINGS OF THE 2014 15TH INTERNATIONAL CONFERENCE ON GROUND PENETRATING RADAR (GPR 2014), 2014, : 36 - 39
[29] Effect of the Printing Angle on Flexural Strength, Microhardness, and Surface Roughness of Three-Dimensionally Printed Resin for Provisional Restorations
Queiroz, Nadia Vieira
Martins, Anderson Sergio
Antunes, Alberto Nogueira da Gama
Barros, Vinicius de Magalhaes
PESQUISA BRASILEIRA EM ODONTOPEDIATRIA E CLINICA INTEGRADA, 2025, 25
[30] Pore-filling Three-dimensionally Ordered Macroporous Polyimide Composite Proton Conducting Membranes
Dai Xin
Geng Lei
Liu Dan
Lu Chang-li
Yang Bai
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES, 2011, 27 (05) : 896 - 899

← 1 2 3 4 5 →