INVESTIGATION OF TRIANGULAR HEATS APPLIED TO MILD STEEL PLATES.

被引：0
|
作者：
Nicholls, J.I.
Weerth, D.E.
机构：
来源：
Engineering Journal | 1972年 / 9卷 / 04期
关键词：
STEEL HEAT TREATMENT;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Triangular heats were applied to flat plates and the induced curvature measured. The theoretical curvatures and the associated residual stresses were calculated using an electronic computer. Prior to the application of the heat curving process a preload was applied to the plate. Tensile test coupons were tested before and after heating to determine if there were any significant changes in the yield strength, ultimate strength, fracture stress, modulus of elasticity, and percentage elongation. Test procedure and results are discussed.
引用
收藏
页码：137 / 141
相关论文
共 50 条
  • [31] Shape Function Violating Continuity Requirements as Applied to the Finite Element Analysis of Plates.
    Dorosz, Stanislaw
    Kleiber, Michal
    Archiwum Inzynierii Ladowej, 1975, 21 (02): : 275 - 286
  • [32] AN EXPERIMETAL AND NUMERICAL INVESTIGATION OF RESIDUAL STRESSES IN BUTT WELDING OF TWO MILD STEEL PLATES
    Singh, Gurdeep
    Brar, Gurinder Singh
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 1159 - 1164
  • [33] Investigation of Residual Stress in Laser Formed Mild Steel Plates Using Neutron Diffraction
    Knupfer, Stefan
    Paradowska, Anna M.
    Kirstein, Oliver
    Moore, Andrew
    MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION, 2010, 652 : 123 - +
  • [34] INVESTIGATION OF THE EFFECTS OF PLASMA CUTTING PARAMETERS ON THE ROUGHNESS VARIATION OF SOME MILD STEEL PLATES
    Ilii, Sanda-Maria
    Achitei, Dragos
    Munteanu, Adriana
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 - NEW FACE OF TMCR, 2009, : 315 - 318
  • [35] BRITTLE FRACTURE IN MILD-STEEL PLATES
    BARR, W
    TIPPER, CF
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1947, 157 (02): : 223 - &
  • [36] Mild steel plates impacted by hard projectiles
    Abdel-Kader, Mohamed
    Fouda, Ahmed
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2014, 99 : 57 - 71
  • [37] FATIGUE CRACK PROPAGATION PROPERTIES AND DELTA Kth FOR SEVERAL STRUCTURAL STEEL PLATES.
    Kanao, Masao
    Sasaki, Etsuo
    Ohta, Akihiko
    Kosuge, Michio
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1983, 69 (07): : 868 - 873
  • [38] Flexural behavior of precracked reinforced concrete beams strengthened externally by steel plates.
    Swamy, RN
    Mukhopadhyaya, P
    ACI STRUCTURAL JOURNAL, 1995, 92 (06) : 781 - 781
  • [39] FATIGUE CRACK PROPAGATION PROPERTIES AND DELTA Kth FOR SEVERAL STRUCTURAL STEEL PLATES.
    Kanao, Masao
    Sasaki, Etsuo
    Ohta, Akihiko
    Kosuge, Michio
    Transactions of National Research Institute for Metals (Tokyo), 1986, 27 (02): : 97 - 113
  • [40] IN-LINE TESTING OF THE QUALITY OF HIGH TEMPERATURE THERMOMECHANICAL TREATMENT OF STEEL PLATES.
    Kalinsky, D.N.
    Kamaev, E.A.
    Sov Mater Sci Rev, 1987, 1 (04): : 477 - 479
12345