EFFECT OF STRAIN WAVE SHAPE ON HIGH TEMPERATURE FATIGUE LIFE OF A TYPE 316 STEEL AND APPLICATION OF THE STRAIN RANGE PARTITIONING METHOD.

被引：0
|
作者：
Yamaguchi, Koji
Kanazawa, Kenji
机构：
来源：
Transactions of National Research Institute for Metals (Tokyo) | 1981年 / 23卷 / 03期
关键词：
STRAIN; -; Analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of strain rate and strain wave shape on the low-cycle fatigue of a Type 316 stainless steel were investigated at 600 and 700 degree C. A great reduction in the fatigue life corresponded with a variation in the fracture mode. Especially extensive grain boundary microcracks such as wedge- and cavity-type cracks were observed in slow-fast sawtooth wave shape tests and in tension hold time tests, respectively. The test results were analyzed by the strain range partitioning method proposed by Manson, Halford and Hirschberg. In applying this method, a new technique of partitioning the inelastic strain range was proposed and used. Four component strain range vs life relationships were dependent on the testing temperature between 600 and 700 degree C.
引用
收藏
页码：25 / 33
相关论文
共 50 条
  • [41] Influence of strain range on fatigue life reduction of stainless steel in PWR primary water
    Kamaya, Masayuki
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (12) : 2194 - 2203
  • [42] FATIGUE CRACK GROWTH IN TYPE-316 STAINLESS STEEL AT HIGH TEMPERATURE
    SHAHINIAN, P
    SMITH, HH
    WATSON, HE
    JOURNAL OF ENGINEERING FOR INDUSTRY, 1971, 93 (04): : 976 - +
  • [43] MICROSTRUCTURAL FEATURES OF FATIGUE FAILURE OF MILD STEEL IN TEMPERATURE RANGE OF DYNAMIC STRAIN AGEING
    LOZINSKI.MG
    IVANOV, VS
    ROMANOV, AN
    TERENTYE.VF
    PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1967, 24 (02): : 115 - &
  • [44] APPLICATION OF STRAIN RANGE PARTITIONING METHOD TO FATIGUE-CREEP INTERACTION IN SUS 316 AND 1 one quarter Cr minus one-half Mo STEELS.
    Yamaguchi, Koji
    Kanazawa, Kenji
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1980, 66 (08): : 1160 - 1169
  • [45] PREDICTIONS OF STRESS-STRAIN CURVE AND FATIGUE LIFE FOR AISI 316 STAINLESS STEEL IN CYCLIC STRAINING
    Chou, Liang-Hsiung
    Chiou, Yung-Chuan
    Wu, Chia-Chin
    Huang, Ying-Jen
    JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN, 2016, 24 (03): : 426 - 433
  • [46] Effect of cyclic plastic strain and flow stress on low cycle fatigue life of 316L(N) stainless steel
    Xu, Jinquan
    Huo, Mingchen
    Xia, Ri
    MECHANICS OF MATERIALS, 2017, 114 : 134 - 141
  • [47] THE EFFECT OF STRAIN AMPLITUDE, TEMPERATURE AND INSITU IRRADIATION BY 20 MEV PROTONS UPON THE FATIGUE PROPERTIES OF 316 STAINLESS-STEEL
    MIZUBAYASHI, H
    IKEZAKI, K
    OKUDA, S
    ROBERTS, JM
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1987, 28 (06): : 463 - 475
  • [48] EFFECT OF CREEP ON HIGH STRAIN FATIGUE BEHAVIOR OF A PRESSURE VESSEL STEEL
    WOOD, DS
    WELDING JOURNAL, 1966, 45 (02) : S90 - &
  • [49] A SIMULATION METHOD OF FATIGUE BEHAVIOR AT HIGH-TEMPERATURE OF A WELDED JOINING OF A TYPE-316 AUSTENITIC STEEL
    MOTTOT, M
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1983, 80 (09): : 448 - 448
  • [50] Strain Rate Sensitivity Effect Measured in 316 Steel by the Small Punch Testing Method
    Lowrie, F.
    Gorley, M.
    Surrey, E.
    Wynne, B.
    Wilkes, D.
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (01) : 376 - 383
12345