Identification of the through-thickness properties of thick laminated tubes using the virtual fields method

被引：0

作者：

Pierron, Fabrice ^{[1
]}

Zhavoronok, Sergei ^{[2
]}

Grédiac, Michel ^{[3
]}

机构：

[1] SMS, Département Mécanique et Matériaux, Ecole Nationale Supérieure des Mines de Saint-Etienne, 158, cours Fauriel, 42023, Saint-Etienne, Cedex 2, France

[2] Moscow State Aviation Institute, Technical University, Department 603, 125871, Volokolamskoie shosse 4, Moscow, Russia

[3] LERMES, Université Blaise Pascal, 24, avenue des Landais, 63174, Aubière, Cedex, France

来源：

| 2000年 / Elsevier Science Ltd, Exeter, United Kingdom卷 / 37期

关键词：

Computer simulation - Finite element method - Linear equations - Stiffness - Tubes (components);

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper presents a method to determine the four through-thickness stiffnesses of thick laminated composites. Only one specimen submitted to one test is required. The procedure is based on a suitable use of the principle of virtual work with four independent virtual fields. This leads to a system of four linear equations where the through-thickness stiffnesses are the unknowns. The system is finally inverted to determine the stiffnesses. Finite element simulations have been carried out to validate the approach and to show its stability.

引用

共 50 条

[21] Mode I delamination toughness of laminated composites with through-thickness reinforcement
Jain, Lalit K.
Mai, Yiu-Wing
Applied Composite Materials, 1994, 1 (01) : 1 - 17
[22] Finite element analysis of laminated shells with exact through-thickness integration
Kumar, WPP
Palaninathan, R
COMPUTERS & STRUCTURES, 1997, 63 (01) : 173 - 184
[23] Identification of the through-thickness moduli of thick composites from whole-field measurements using the Iosipescu fixture:: theory and simulations
Pierron, F
Grédiac, M
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (04) : 309 - 318
[24] THROUGH-THICKNESS PROPERTIES OF STRUCTURAL-STEELS
CROLL, JE
JOURNAL OF THE AUSTRALASIAN INSTITUTE OF METALS, 1975, 20 (03): : 171 - 179
[25] Determining the through-thickness properties of FRP materials
Ferguson, RF
Hinton, MJ
Hiley, MJ
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (09) : 1411 - 1420
[26] Applying the Virtual Fields Method to Measure During Milling the Through-Thickness Residual Stress Distribution in Aluminum-Alloy Sheet Material
Jovani, T.
Blaysat, B.
Chanal, H.
Grediac, M.
EXPERIMENTAL MECHANICS, 2023, 63 (02) : 221 - 235
[27] Applying the Virtual Fields Method to Measure During Milling the Through-Thickness Residual Stress Distribution in Aluminum-Alloy Sheet Material
T. Jovani
B. Blaysat
H. Chanal
M. Grédiac
Experimental Mechanics, 2023, 63 : 221 - 235
[28] Dielectric and electrochemical properties through-thickness mapping on extremely thick plasma sprayed TiO2
Ctibor, Pavel
Sedlacek, Josef
Pala, Zdenek
CERAMICS INTERNATIONAL, 2016, 42 (06) : 7183 - 7191
[29] Effects of winding angles on through-thickness properties and residual strains of thick filament wound composite rings
Ha, SK
Jeong, JY
COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (01) : 27 - 35
[30] Application of the virtual fields method to the identification of material properties using vibrating plates
Giraudeau, A.
Guo, B.
Pierron, F.
STRUCTURAL DYNAMICS - EURODYN 2005, VOLS 1-3, 2005, : 1911 - 1916

← 1 2 3 4 5 →