Robotized unit for making investment casting molds

被引：0
|
作者：
Sokol, I.B. [1 ]
Belyaev, V.M. [1 ]
Pepelin, A.B. [1 ]
机构：
[1] AO 'NIITavtoprom', Moscow, Russia
来源：
Litejnoe Proizvodstvo | 1997年 / 10期
关键词：
Coating techniques - Industrial robots - Investment casting - Manufacture - Molds - Performance - Quality assurance;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Several versions of robotic units for manufacturing the molds of investment casting are designed. An availability of two baths with suspension and 'fluidized bed' sand slingers permits to use two compoundings of suspensions and two type of powder refractories for face and next layers of coating. Ground-type industrial robot operates in angular system of coordinates and has six degrees of freedom. Advantage of robot using is the possibility for manufacturing the massive molds with high stable quality.
引用
收藏
页码：24 / 25
相关论文
共 50 条
  • [31] Modelling selection of structure and properties of monolayer electrophoretic shell molds during investment casting
    Odinokov, V., I
    Dmitriev, E. A.
    Evstigneev, A., I
    Sviridov, A., V
    Ivankova, E. P.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1672 - 1676
  • [32] Pure titanium casting into zirconia-modified magnesia-based investment molds
    Hung, CC
    Hou, GL
    Tsai, CC
    Huang, CC
    DENTAL MATERIALS, 2004, 20 (09) : 846 - 851
  • [33] Stack-mould casting——Bronze master mould for making clay molds
    Tan Derui
    China Foundry, 2016, 13 (05) : 297 - 297
  • [34] BACKYARD FOUNDRY FOR SAND CASTING. PART II: MAKING THE MOLDS.
    Balmer Jr., Charles
    1984, (06):
  • [35] INFLUENCE OF CERAMIC MOLDS PARAMETERS ON THE QUALITY OF SMALL-SCALE CASTS PRODUCED BY THE INVESTMENT CASTING
    Dydak, Artur
    Kurdziel, Piotr
    Zaba, Krzysztof
    Puchlerska, Sandra
    Szwachta, Grzegorz
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 151 - 155
  • [36] Removing pattern compound from ceramic molds in investment casting by melting out in hot water
    Suslov, A.E.
    Zhukov, A.A.
    Serebryakov, S.P.
    Litejnoe Proizvodstvo, 2001, (11): : 13 - 17
  • [37] CASTING PURE TITANIUM INTO COMMERCIAL PHOSPHATE-BONDED SIO2 INVESTMENT MOLDS
    TAKAHASHI, J
    KIMURA, H
    LAUTENSCHLAGER, EP
    LIN, JHC
    MOSER, JB
    GREENER, EH
    JOURNAL OF DENTAL RESEARCH, 1990, 69 (12) : 1800 - 1805
  • [38] RHEOLOGICAL PROPERTIES OF COMPOSITIONS USED FOR MAKING PATTERNS FOR INVESTMENT CASTING
    LAKEEV, AS
    BORISOV, GP
    COLLOID JOURNAL-USSR, 1972, 34 (01): : 76 - &
  • [39] INVESTMENT-CASTING CUTS COST OF MAKING GEAR MECHANISMS
    不详
    MANUFACTURING ENGINEERING, 1987, 98 (02): : 22 - 22
  • [40] Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes
    Coman, Adrian
    Rodean, Simona
    Leordean, Danut Vasile
    Patalita, Carol
    INNOVATIVE MANUFACTURING ENGINEERING, 2013, 371 : 188 - 192
12345