STUDY OF AN ELECTRONICALLY CONTROLLED HYDRAULICALLY ACTUATED FUEL INJECTION SYSTEM (1ST REPORT, THEORETICAL ANALYSIS AND CALCULATION METHOD.

被引：0

作者：

Saito, Atushi ^{[1
]}

Sugiura, Yasuo ^{[1
]}

机构：

[1] Tanaka, Mituo, Tanaka, Mituo

来源：

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 1986年 / 52卷 / 476期

关键词：

DIESEL ENGINES - Fuel Injection;

D O I：

暂无

中图分类号：

TK [能源与动力工程];

学科分类号：

0807 ;

摘要：

Prototype tests were performed on an electronically controlled, hydraulically activated, fuel injection system with a new injector structure. This paper describes improvements in theoretical analysis and calculation methods concerning the injector. Simplified treatment was applied to this theoretical analysis, covering the solenoid pull force and determination of spring constant of the valve seat. Calculation accuracy was improved in consequence of a study of the calculation interval in the calculation methods. As a result of calculations under various conditions, the equations and the calculation methods are judged to be suitable, since the calculation time is short and no divergence takes place. Thus, research into and improvement of new injector structures became easier. The next paper will describe the results of the calculations and tests.

引用

页码：1990 / 1996

共 50 条

[21] STUDY ON STRENGTH DESIGN METHODS OF PLASTIC GEARS (1ST REPORT, CALCULATION METHOD OF FATIGUE STRENGTH DUE TO STRAIN ENERGY).
Tsukamoto, Naohisa
Taki, Tokihiko
Nishida, Noriteru
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (486): : 432 - 435
[22] Study on the optimal driving pattern of a stepping motor (1st report, theoretical analysis for high-speed driving)
Tomisawa, Masao
Imagi, Akihiko
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1988, 54 (508): : 2890 - 2897
[23] DEVELOPMENT OF DIGITALLY CONTROLLED MAGNETIC BEARING - (1ST REPORT, SINGLE AXIS CONTROL METHOD).
Hisatani, Masujiro
Inoue, Yoshio
Mitsui, Junichi
Bulletin of the JSME, 1986, 29 (247): : 214 - 220
[24] CONVECTIVE HEAT TRANSFER WITH A VAPORIZATION OF SUSPENDED SPRAY DROPLETS (1st REPORT, THEORETICAL ANALYSIS).
Takimoto, Akira
Matsuda, Osamu
Hayashi, Yujiro
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1986, 52 (475): : 1333 - 1341
[25] Spin angle control lapping of balls (1st report) - theoretical analysis of lapping mechanism
Seimitsu Kogaku Kaishi, 12 (1773-1777):
[26] Development of the swing system of hybrid construction machinery (1st report, the study on the control method of swing motor)
Sugano, Naoki
Yoshimatu, Hideaki
Inoue, Koji
Uejima, Mamoru
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2003, 69 (04): : 933 - 938
[27] Measurement of the thermal diffusivity of thin film on substrate by the photoacoustic method. (1st Report, examination of the method and measurement of metal thin foils)
Akabori, Masanori
Miyagi, Shunsuke
Nagasaka, Yuji
Nagashima, Akira
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1991, 57 (541): : 3184 - 3190
[28] PREDICTION OF THE IN-CYLINDER FLOW AND HEAT TRANSFER IN DIRECT INJECTION DIESEL ENGINE (1ST REPORT, CALCULATION PROCEDURE).
Inoue, Susumu
Kobayasi, Kiyosi
1600, (53):
[29] Fundamental study on heavy fuel reformulation through sonochemistry and chemical-thermodynamics (1st report, sonochemistry in fuel)
Department of Mechanical Engineering, Doshisha University, 1-3 Tataramiyakodani, Kyotanabe-shi, Kyoto, 610-0321, Japan
Nihon Kikai Gakkai Ronbunshu, B, 2006, 12 (2984-2991):
[30] Study on surge and rotating stall in axial compressors (1st report, a summary of the measurement and fundamental analysis method)
Ishii, Hiroshi
Kashiwabara, Yasushige
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1988, 54 (503): : 1669 - 1676

← 1 2 3 4 5 →