Development of Radiation Hardness Components for ITER Remote Maintenance

被引：0
|
作者：
Obara, Kenjiro [1 ]
Kakudate, Satoshi [1 ]
Oka, Kiyoshi [1 ]
Ito, Akira [1 ]
Yagi, Toshiaki [1 ,3 ]
Morita, Yousuke [2 ,4 ]
机构：
[1] Naka Fusion Research Establishment, Japan Atomic Energy Research Institute 2-4 Shirakata-shirane, Tokai-mura, Naka-gun, Ibaraki, 311-01, Japan
[2] Takasaki Radiation Chemistry Research Establishment, JAERI 1233 Watanuki-machi, Gunma, Takasaki,370-1202, Japan
[3] Deputy General Manager, Department of Development, Takasaki Radiation Chemistry Research Establishment, JAERI, Japan
[4] Senior Researcher, Advanced Materials Laboratory, Takasaki Radiation Chemistry Research Establishment, JAERI, Japan
来源：
Journal of Robotics and Mechatronics | 1998年 / 10卷 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：121 / 132
相关论文
共 50 条
  • [21] The ITER Remote Maintenance Management System
    Tesini, Alessandro
    Rolfe, A. C.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 236 - 241
  • [22] The European contribution to the ITER Remote Maintenance
    Damiani, C.
    Annino, C.
    Balague, S.
    Bates, P.
    Ceccanti, F.
    Di Mascio, T.
    Dubus, G.
    Esque, S.
    Gonzalez, C.
    Lewczanin, M.
    Locke, D.
    Mont, L.
    Olajos, K.
    Ranz, R.
    Shuff, R.
    Puiu, A.
    Van Hille, C.
    Van Uffelen, M.
    Choi, C. H.
    Friconneau, J. P.
    Hamilton, D.
    Palmer, J.
    Tesini, A.
    FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) : 2251 - 2256
  • [23] Development of in-vessel pipe alignment tool for ITER blanket remote maintenance
    Noguchi, Yuto
    Maruyama, Takahito
    Takeda, Nobukazu
    FUSION ENGINEERING AND DESIGN, 2017, 124 : 623 - 627
  • [24] Radiation effects on optical components of a laser radar sensor designed for remote metrology in ITER
    Menon, MM
    Grann, EB
    Slotwinski, A
    17TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, 1998, : 977 - 980
  • [25] Force control of remote maintenance robot for the ITER
    Takeo, K
    Kosuge, K
    Shibanuma, H
    Oka, K
    IECON'01: 27TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3, 2001, : 450 - 455
  • [26] Integration of remote refurbishment performed on ITER components
    Dammann, A.
    Antola, L.
    Beaudoin, V.
    Dremel, C.
    Evrard, D.
    Friconneau, J. P.
    Lemee, A.
    Levesy, B.
    Pitcher, C. S.
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1457 - 1460
  • [27] Radiation hardness test of mica bolometer for ITER in JMTR
    Reichle, R
    Nishitani, T
    Hodgson, ER
    Ingesson, LC
    Ishitsuka, E
    Kasai, S
    Mast, KF
    Shikama, T
    Vallet, JC
    Yamamoto, S
    ADVANCED DIAGNOSTICS FOR MAGNETIC AND INERTIAL FUSION, 2002, : 295 - 298
  • [28] ITER divertor maintenance:: Development of a control system for the remote handling of the divertor cassette mover
    Esque, Salvador
    Saarinen, Hannu
    Muhammad, Ali
    Zhai, Likui
    Tammisto, Jyrki
    Seppala, Juho
    Mattila, Jouni
    Virvalo, Tapio
    Linjama, Matti
    Vilenius, Matti
    22ND IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2007, : 60 - 65
  • [29] Remote handling test and full-scale equipment development for ITER blanket maintenance
    Nakahira, M
    Kakudate, S
    Oka, K
    Taguchi, K
    Takiguchi, Y
    Tada, E
    Matsuhira, N
    Shibanuma, K
    Haange, R
    17TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, 1998, : 929 - 932
  • [30] Guidelines for remote handling maintenance of ITER neutral beam line components: Proposal of an alternate supporting system
    Cordier, J. J.
    Bayetti, P.
    Hemsworth, R.
    David, O.
    Friconneau, J. P.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2015 - 2020
12345