Use of Fuel in Bottom Blast Oxygen Converters.

被引：0
|
作者：
Bantizmanskii, V.I.
Trubavin, V.I.
Boichenko, B.M.
机构：
来源：
| 1600年
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The conditions of introduction of oxygen in a jacket of gaseous or vapor fuel into the converter bath are considered. The appropriate relations between the gaseous fuel and oxygen pressures during scavenging of the metal in bottom blast converters are determined. The advisability of using liquid fuel as the protective jacket from the standpoint of maintenance of the converter bottom and optimization of the most important indices of steel production in a bottom blast oxygen converter is demonstrated.
引用
收藏
相关论文
共 50 条
  • [1] Factors Determining the Optimal Frequency of the Blast Pulsations in Oxygen Converters.
    Yavoiskii, A.V.
    Tarnovskii, G.A.
    Kulichev, La.A.
    Deryabina, L.L.
    Khisamutdinov, N.E.
    Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya, 1986, (07): : 37 - 41
  • [2] HEAT TRANSFER IN TUYERES FOR OXYGEN BOTTOM-BLOWING CONVERTERS.
    Denier, G.
    Grosjean, J.C.
    Zanetta, H.
    Ironmaking and Steelmaking, 1980, 7 (03): : 123 - 126
  • [3] Effect of Manganese on Oxygen Activity in Steel in Bottom-Blown Oxygen Converters.
    Kodrle, Ludek
    Hutnicke listy, 1987, 42 (01): : 3 - 8
  • [4] Behavior of the Tuyere Supporting Bricks in the Oxygen Bottom-blowing Converters.
    Chastant, Marc
    Mulsant, Marc
    Kuhnast, Jacques
    Grosjean, Jean Claude
    Cahiers d'Informations Techniques - Revue de Metallurgie, 1981, 78 (10): : 775 - 784
  • [5] Steelmaking Technology in Oxygen Converters.
    Anon
    Freiberger Forschungshefte (Reihe) B, 1987,
  • [6] SLAG FORMATION IN OXYGEN CONVERTERS.
    Didkovskii, V.K.
    Rogovtsev, N.I.
    Tret'yakov, E.V.
    Tol'skii, A.A.
    Orobtsev, Yu.V.
    Kamchatnyi, G.A.
    Metallurgist (English Translation of Metallurg), 1975, 19 (9-10): : 723 - 725
  • [7] Progress in Bottom-Blown LD Converters.
    Krieger, Wilfried
    Nakesch, Johann
    Poferl, Guenter
    Apfolterer, R.
    Berg- und Huettenmaennische Monatshefte, 1988, 133 (01): : 3 - 8
  • [8] REFRACTORY LINING OF OXYGEN STEELMAKING CONVERTERS.
    Hubner, F.
    Kaltner, E.
    Moertl, G.
    Veitsch-Radex Rundschau, 1987, 75 (3-4):
  • [9] Problems of Gas Recovery from Oxygen Converters.
    Pawlik, Tadeusz
    Michalik, Kazimierz
    Poznanski, Jakub
    Hutnik, 1979, 46 (05): : 205 - 208
  • [10] Feasible Utilization of Mud from Oxygen Converters.
    Maroszczyk, Veslav
    Parma, Vaclav
    Hutnicke listy, 1988, 43 (02): : 81 - 87
12345