STUDY OF THE CREEP ACTIVATION AREA USING AN INCREMENTAL STEP CREEP TEST.

被引：0
|
作者：
Rosselet, Andre
Benoit, Willy
机构：
来源：
Res Mechanica: International Journal of Structural Mechanics and Materials Science | 1983年 / 9卷 / 03期
关键词：
IRON AND ALLOYS - Creep - METALLOGRAPHY - Microstructures - STRESSES;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The incremental step creep test consists of loading a tensile specimen at a given temperature by incremental steps, each step being followed by constant load conditions for several seconds. From the measured creep rate after each step, the apparent activation area for creep can be determined as a function of the stress at the test temperature and for a given microstructural state. Starting from this activation area, it is also possible to estimate the apparent activation energy for creep. The results of tests performed with commercially pure iron in the as-received condition as well as after creep deformation are analyzed and discussed.
引用
收藏
页码：137 / 158
相关论文
共 50 条
  • [21] Study of creep test and creep model of hydraulic concrete subjected to cyclic loading
    Huang, Yaoying
    Zhang, Yao
    He, Yiyang
    Wei, Haidong
    JOURNAL OF BUILDING ENGINEERING, 2024, 86
  • [22] Study on Creep Properties of Salt Rock with Impurities During Triaxial Creep Test
    Wu C.
    Liu J.
    Zhou Z.
    Xu H.
    Wu F.
    Zhuo Y.
    Wang L.
    Gongcheng Kexue Yu Jishu/Advanced Engineering Sciences, 2017, 49 : 165 - 172
  • [23] A STUDY OF CREEP BEHAVIOR OF TSV-CU BASED ON NANOINDENTAION CREEP TEST
    Wu, W.
    Qin, F.
    An, T.
    Chen, P.
    JOURNAL OF MECHANICS, 2016, 32 (06) : 717 - 724
  • [24] Viscoelastic incremental formulation using creep and relaxation differential approaches
    Claude Chazal
    Rostand Mouto Pitti
    Mechanics of Time-Dependent Materials, 2010, 14 : 173 - 190
  • [25] Viscoelastic incremental formulation using creep and relaxation differential approaches
    Chazal, Claude
    Pitti, Rostand Moutou
    MECHANICS OF TIME-DEPENDENT MATERIALS, 2010, 14 (02) : 173 - 190
  • [26] Minimum creep rate from primary creep using strain relaxation and recovery test
    Sinha, NK
    Terada, T
    Au, P
    SCRIPTA MATERIALIA, 2003, 49 (12) : 1145 - 1150
  • [27] A creep life assessment method for boiler pipes using small punch creep test
    Izaki, Toru
    Kobayashi, Toshimi
    Kusumoto, Junichi
    Kanaya, Akihiro
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (09) : 637 - 642
  • [28] Interpretation of the pile loading test using creep
    Ku, Chih-Sheng
    Wong, Chia-Yi
    PROCEEDINGS OF THE SEVENTEENTH (2007) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1- 4, PROCEEDINGS, 2007, : 1464 - +
  • [29] CREEP ASSESSMENT OF LARGE SIZE HIGH TEMPERATURE COMPONENTS USING SMALL CREEP TEST SPECIMENS
    Ali, Balhassn S. M.
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 1, 2016,
  • [30] Analysis of the impression creep test method using a rectangular indenter for determining the creep properties in welds
    Hyde, TH
    Sun, W
    Becker, AA
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1996, 38 (10) : 1089 - 1102
12345