CORROSION OF INCONEL 600 ALLOY IN HIGH CONCENTRATED NaOH SOLUTION.

被引:0
|
作者
Sugie, Yosohiro [1 ]
Yanagida, Takashi [1 ]
Fujii, Satoshi [1 ]
Sakamoto, Chiaki [1 ]
机构
[1] Himeji Inst of Technology, Himeji, Jpn, Himeji Inst of Technology, Himeji, Jpn
关键词
ENVIRONMENTAL TESTING - SODIUM COMPOUNDS - Solutions;
D O I
暂无
中图分类号
学科分类号
摘要
Polarization curves for the both specimens showed no change in electrochemical behavior in various corrosive environmental conditions at 50 degree C. However, the both specimens showed three peaks at higher temperatures than 50 degree C. The solution treated specimen showed a slightly low current density in the primary passive region and a slightly high current density in the secondary anodic peak, compared with those of the sensitized specimen. The films formed on the specimen surface during corrosion tests in 20M NaOH solution at 140 degree C were made of NiO, Cr//2O//3 and Fe//3O//4. The tests of crevice corrosion of I-600 and carbon steel (S15C) showed that general corrosion took place on the solution treated specimen, but the intergranular corrosion under the oxide films took place and it propagated to the crevice in the sensitized specimen.
引用
收藏
页码:229 / 234
相关论文
共 50 条
  • [41] On the corrosion and passivity of Inconel alloy 625 in HNO3 solution
    Morshed-Behbahani, Khashayar
    Nasiri, Ali
    CORROSION COMMUNICATIONS, 2025, 17 : 28 - 34
  • [42] Effect of carbon on corrosion and passivation of iron in hot concentrated NaOH solution in relation to caustic stress corrosion cracking
    Flis, J.
    Ziomek-Moroz, M.
    Flis-Kabulska, I.
    CORROSION SCIENCE, 2009, 51 (08) : 1696 - 1701
  • [43] A study on fretting fatigue life for the Inconel alloy 600 at high temperature
    Kwon, Jae-do
    Park, Dae-kyu
    Woo, Seung-wan
    Yoon, Dong-hwan
    Chung, Ilsup
    NUCLEAR ENGINEERING AND DESIGN, 2010, 240 (10) : 2521 - 2527
  • [44] Fretting wear properties of Inconel600 alloy at high temperature
    Xin, Long
    Ma, Miao
    Lu, Yong-Hao
    Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (07): : 928 - 935
  • [45] Study on the mechanism of intergranular stress corrosion cracking of alloy 600 in high temperature alkaline solution
    Kawamura, Hirotaka
    Hirano, Hideo
    Takamatsu, Hiroshi
    Matsunaga, Tomoya
    Shirai, Shunsuke
    Yamaoka, Katsuaki
    Ohshinden, Kimihisa
    Sakai, Kimio
    Zairyo to Kankyo/ Corrosion Engineering, 1999, 48 (04): : 226 - 234
  • [46] STRESS-CORROSION CRACKING TESTING OF INCONEL ALLOY-600 AND ALLOY-690 UNDER HIGH-TEMPERATURE CAUSTIC CONDITIONS
    CRUM, JR
    CORROSION, 1986, 42 (06) : 368 - 372
  • [47] High Temperature Corrosion of Inconel 600 in NaCl-KCl Molten Salts
    Salinas-Solano, G.
    Porcayo-Calderon, J.
    Gonzalez-Rodriguez, J. G.
    Salinas-Bravo, V. M.
    Ascencio-Gutierrez, J. A.
    Martinez-Gomez, L.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2014, 2014
  • [48] STRESS-CORROSION CRACKING OF INCONEL 600 IN HIGH-TEMPERATURE WATER
    BANDY, R
    VANROOYEN, D
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1981, 39 : 447 - 447
  • [49] STRESS-CORROSION OF HIGH-PURITY ALLOYS OF THE TYPE INCONEL 600
    DACUNHABELO, M
    COLIN, D
    BERGE, P
    ROUILLON, Y
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1980, 77 (09): : 887 - 893
  • [50] MECHANISM AND KINETICS OF OXIDATION OF ALUMINUM ALLOYS IN NaOH SOLUTION.
    Pautov, V.N.
    Lupenko, G.K.
    Stenilovskaya, L.A.
    Androsova, E.B.
    Protection of Metals (English translation of Zaschita Metallov), 1985, 21 (03): : 397 - 400