Synthesis of TiB2-TiC composites by the solid-state reaction between B4C and Ti powders

被引:0
|
作者
Dept. of Mat. Sci. and Engineering, Fac. of Eng. and Resource Science, Akita University, 1-1, Tegatagakuen-cho, Akita-shi 010-8502, Japan [1 ]
机构
来源
J Ceram Soc Jpn | / 1251卷 / 1041-1045期
关键词
Grain size and shape - Powder metals - Reaction kinetics - Synthesis (chemical) - Titanium compounds;
D O I
暂无
中图分类号
学科分类号
摘要
The mechanism of solid-state reaction between B4C and Ti powders has been examined in the temperature range between 1000 °C and 1300 °C. In the early stage of the reaction, TiB and nonstoichiometric TiC0.58 in equilibrium with C-saturated Ti were formed from B4C and Ti; then TiB2 and TiCx containing higher amounts of C were formed from TiB, TiC0.58 and remaining B4C until the reaction ceased at an x-value of 0.69. This reaction path was not changed basically in the temperature range examined although the reaction rate was increased with temperature. Every product grain consisted of a TiCx core and a TiB2 layer around the core. This suggests that B hardly migrates in products and the reaction proceeds mainly by inward C diffusion and outward Ti diffusion through the products.
引用
收藏
相关论文
共 50 条
  • [41] Microstructure and Property of TiB2 Reinforced Reaction-bonded B4C Composites
    Lin Qing-Qing
    Dong Shao-Ming
    He Ping
    Zhou Hai-Jun
    Hu Jian-Bao
    JOURNAL OF INORGANIC MATERIALS, 2015, 30 (06) : 667 - 672
  • [42] Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems
    Yi, Meng
    Zhang, Xiangzhao
    Liu, Guiwu
    Wang, Bo
    Shao, Haicheng
    Qiao, Guanjun
    MATERIALS CHARACTERIZATION, 2018, 140 : 281 - 289
  • [43] Effects of B4C particle size and content on microstructure and properties of in-situ TiB2-TiC composite coatings prepared by plasma spraying
    Wang, Xing-yu
    Yang, Yong
    Zhao, Yu -ping
    Zhang, Xu-ning
    Wang, Yan-wei
    Tian, Wei
    SURFACE & COATINGS TECHNOLOGY, 2023, 459
  • [44] TiB2-TiC/Ti(C,N)复合涂层的研究进展
    刘宏伟
    朱胜
    殷凤良
    郭伟玲
    材料导报, 2013, 27 (13) : 42 - 45
  • [45] Synthesis and properties of conductive B4C ceramic composites with TiB2 grain network
    Ren, Donglou
    Deng, Qihuang
    Wang, Ji
    Yang, Jisen
    Li, Youbing
    Shao, Junqi
    Li, Mian
    Zhou, Jie
    Ran, Songlin
    Du, Shiyu
    Huang, Qing
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2018, 101 (09) : 3780 - 3786
  • [46] Formation mechanism of B4C-TiB2-TiC ceramic composite produced by mechanical alloying of Ti-B4C powders
    Rafiei, M.
    Salehi, M.
    Shamanian, M.
    ADVANCED POWDER TECHNOLOGY, 2014, 25 (06) : 1754 - 1760
  • [47] Diffusion path and reaction mechanism between Ti and B4C
    Tang, JX
    Cheng, JH
    Zeng, ZQ
    Miao, HZ
    JOURNAL OF INORGANIC MATERIALS, 2000, 15 (05) : 884 - 888
  • [48] EFFECT OF CARBON ADDITIONS AND B4C PARTICLE SIZE ON THE MICROSTRUCTURE AND PROPERTIES OF B4C TiB2 COMPOSITES
    McCuiston, R. C.
    LaSalvia, J. C.
    Moser, B.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES III, 2008, 28 (02): : 257 - +
  • [49] Synthesis and properties of TiB2/TiN and TiB2/B4C films
    Andrievski, RA
    Kalinnikov, GV
    NANOSTRUCTURED THIN FILMS AND NANODISPERSION STRENGTHENED COATINGS, 2004, 155 : 175 - 182
  • [50] Synthesis of Ti-B-C composites by reactive spark plasma sintering of B4C and Ti
    Sugiyama, S
    Asari, K
    Taimatsu, H
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2000, 108 (08) : 747 - 752