IMPROVED DESIGN OF TOOLS FOR BROACHING TEETH IN STRAIGHT BEVEL GEARS.

被引：0
|
作者：
Kalashnikov, A.S.
机构：
来源：
| 1978年 / 49卷 / 02期
关键词：
GEAR MANUFACTURE - Equipment;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A study was made to design more effective gear manufacture for automobile differential gears. It has been established that rough cutting teeth in bevel gears with 5mm and greater module using rotary broaches is best done with a stationary tool spindle. Non-uniformity of the allowance for finishing which develops, is compensated through the use of large diameter broaches. To improve cutting conditions it is suggested that the cutters are divided into three groups and that the cutter blocks are arranged in the broach body such that blocks with narrow teeth alternate with those with wide teeth.
引用
收藏
页码：20 / 22
相关论文
共 50 条
  • [21] Optimum design of straight bevel gears pair using evolutionary algorithms
    Abolfazl Zolfaghari
    Masoud Goharimanesh
    Ali Akbar Akbari
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 : 2121 - 2129
  • [22] MODIFICATION OF THE ADDENDA OF EXTERNAL TEETH OF INVOLUTE GEARS.
    Andozhskii, V.D.
    Rogachevskii, N.I.
    Soviet engineering research, 1985, 5 (07): : 9 - 11
  • [23] CONTINUOUS SHAPING OF HARDENED TEETH OF CYLINDRICAL GEARS.
    Ovumyan, G.G.
    1600, (06):
  • [24] Slippage of Teeth of Three-dimensional Gears.
    Kaplun, A.M.
    Izvestia vyssih ucebnyh zavedenij. Masinostroenie, 1980, (01): : 40 - 43
  • [25] EXPERIENCE IN THE INTRODUCTION OF LOW-WASTE MANUFACTURING PROCESSES FOR STRAIGHT-TEETH BEVEL GEARS
    KALASHNIKOV, AS
    SOVIET ENGINEERING RESEARCH, 1983, 3 (01): : 35 - 37
  • [26] Teeth surface design for flashed cold die forging bevel gears
    Jin, Junsong
    Xia, Juchen
    Hu, Guoan
    Chen, Xia
    Li, Dacai
    Hu, Mingfa
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2006, 17 (19): : 2038 - 2041
  • [27] ACCURACY OF ENGAGEMENT OF STRAIGHT TOOTHED BEVEL GEARS
    NEZHURIN, IP
    NOVIKOV, VS
    RUSSIAN ENGINEERING JOURNAL, 1976, 56 (09): : 52 - 54
  • [28] Tooth contact analysis of straight bevel gears in the function of the modification of number of teeth of the driving gear
    Bodzas, Sandor
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2019, 20 (01) : 24 - 30
  • [29] Study on transmission error of straight bevel gears
    Sentoku, Hirofumi
    Itou, Tomonobu
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2002, 68 (06): : 1848 - 1854
  • [30] Design and Operation of Polyamide Gears.
    Bogdanzaliew, K.
    Drechsler, V.
    Maschinenbautechnik, 1980, 29 (05): : 226 - 231
12345