Electrostatic separation of aluminum from dross

被引：12
|
作者：
Mah, K. [1 ]
Toguri, J.M. [1 ]
Smith, H.W. [1 ]
机构：
[1] Department of Metallurgy and Materials Science, University of Toronto, Ont. M5S 1A4, United States
来源：
Conservation and Recycling | 1986年 / 9卷 / 04期
关键词：
ALUMINUM AND ALLOYS - Scrap - FURNACES; MELTING; -; SEPARATORS; Electrostatic;
D O I：
10.1016/0361-3658(86)90067-6
中图分类号：
学科分类号：
摘要：
This study investigates the use of an electrostatic separator to recover the lost metal. After characterizing the dross constituents, a preliminary test on an electrostatic separator resulted in a successful separation between metal and an oxide-salt phase. A commercial high tension separation unit was designed through factorial tests and a number of circuit configurations were developed. Using computer predictions and experimental simulations, a concentrate was produced that could be recirculated into the smelter profitably.
引用
收藏
页码：325 / 334
相关论文
共 50 条
  • [31] DROSCAR - Pilot plant recovery of aluminum from dross
    Meunier, J
    Laflamme, CB
    Duchesne, A
    PROCEEDINGS OF THE XIII INTERNATIONAL CONGRESS ON ELECTRICITY APPLICATIONS, VOLS 1 AND 2, 1996, : WTI11 - WTI19
  • [32] Effect of atmosphere on metal recovery from aluminum dross
    Okazaki, H
    Takai, M
    Hayashi, N
    Uehara, T
    Ohzono, T
    REWAS'99 GLOBAL SYMPOSIUM ON RECYCLING, WASTE TREATMENT AND CLEAN TECHNOLOGY VOLUME I-III, 1999, : 975 - 984
  • [33] Recycling of Oxide from Dross into Aluminum Electrolysis Cells
    Syvertsen, Martin
    Oye, Bjarte
    LIGHT METALS 2018, 2018, : 1115 - 1121
  • [34] Utilization of aluminum dross: Refractories from industrial waste
    Ramaswamy, Parvati
    Gomes, Sylvester Avijit
    Ravichander, Nitin Paul
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018), 2019, 577
  • [35] Separation of Nickel and Tin from copper alloy dross
    Lee, Jung-Il
    Hong, Chang Woo
    Ryu, Jeong Ho
    JOURNAL OF THE KOREAN CRYSTAL GROWTH AND CRYSTAL TECHNOLOGY, 2014, 24 (05): : 224 - 228
  • [36] Review of aluminum dross processing
    Peterson, RD
    Newton, L
    LIGHT METALS 2002, 2002, : 1029 - 1037
  • [37] Microstructures of various aluminum dross
    Fukumoto, Shinji
    Hookabe, Tomoko
    Tsubakino, Harushige
    Keikinzoku/Journal of Japan Institute of Light Metals, 2000, 50 (08): : 392 - 397
  • [38] Optimization of the extraction of aluminum sulfate and ammonium aluminum sulfate alums from aluminum dross tailings
    M. A. Mohamed
    M. E. Kassim
    E. A. El-katatny
    Journal of Materials Research, 1998, 13 : 1075 - 1083
  • [39] Evaluation of Aluminum White Dross
    Oner, Ilayda Elif
    Polat, Buse Tugce
    Kan, Selcuk
    Benzesik, Kagan
    Yucel, Onuralp
    12TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2022, : 413 - 422
  • [40] DISSOLUTION BEHAVIOR OF ALUMINUM DROSS IN ALUMINUM ELECTROLYTE
    Yang, Youjian
    Wang, Zhaowen
    Fu, Weiqin
    Hu, Xianwei
    Gao, Bingliang
    Shi, Zhongning
    Luo, Xudong
    Zhao, Zhibin
    Li, Min
    LIGHT METALS 2010, 2010, : 277 - 281
12345