Thermal model of a disk coil with directed oil flow

被引：0
|
作者：
Del Vecchio, Robert M. [1 ]
Feghali, Pierre [1 ]
机构：
[1] North American Transformer, Milpitas, United States
来源：
Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference | 1999年 / 2卷
关键词：
Computer simulation - Density (specific gravity) - Electric transformers - Friction - Heat transfer - Insulating oil - Iterative methods - Laminar flow - Temperature - Velocity - Viscosity - Washers;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A model of a disk coil with directed oil flow is presented which utilizes a network of oil flow paths. Along each path segment, oil velocities and temperature rises are computed. The oil flow is assumed to be thermally driven. The model includes temperature dependent oil viscosity, resistivity, oil density, and temperature and velocity dependent heat transfer and friction coefficients. Because of the non-linearities, an iterative solution is necessary. Temperature and oil velocity profiles are computed. From this, the average winding rise and the hot spot temperature can be determined. The model can also be used for optimal positioning of the oil flow washers.
引用
收藏
页码：914 / 919
相关论文
共 50 条
  • [41] Directed fuzzy incidence: A model for illicit flow networks
    Gayathri, G.
    Mathew, Sunil
    Mordeson, J. N.
    INFORMATION SCIENCES, 2022, 608 : 1375 - 1400
  • [42] Ternary hybrid nanofluid (TiO2-SiO2-MoS2/kerosene oil) flow over a rotating disk with quadratic thermal radiation and Cattaneo-Christov model
    Singh, Shiv Pratap
    Kumar, Manoj
    Yaseen, Moh
    Rawat, Sawan Kumar
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2023, 30 (04) : 1262 - 1278
  • [43] Phase Behavior of Disk-Coil Macromolecules
    Kim, YongJoo
    Ha, Edward
    Alexander-Katz, Alfredo
    MACROMOLECULES, 2011, 44 (17) : 7016 - 7025
  • [44] Optimising thermal design for cross flow heat exchanger in fan coil units
    Hassan, Ahmed M.
    Alwan, Adil Abbas
    Hamzah, Hameed K.
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2025, 23 (02) : 391 - 408
  • [45] A COMPARISON OF OIL-WATER FLOW AND OIL-GAS FLOW IN CAPILLARY MODEL
    Zhang, Yihe
    Dai, Liming
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 4, PTS A AND B, 2013, : 1041 - 1046
  • [46] Thermal Performance Assessment of Turbulent Tube Flow Through Wire Coil Turbulators
    Eiamsa-Ard, Smith
    Kongkaitpaiboon, Vichan
    Promvonge, Pongjet
    HEAT TRANSFER ENGINEERING, 2011, 32 (11-12) : 957 - 967
  • [47] Thermal network model for temperature prediction in hard disk drive
    Yee Leong Low
    B. L. Ibrahim See
    C. P. H. Tan
    J. Q. Mou
    E. H. Ong
    Microsystem Technologies, 2009, 15 : 1653 - 1656
  • [48] AXISYMMETRIC FE MODEL TO ANALYSIS OF THERMAL STRESSES IN A BRAKE DISK
    Adamowicz, Adam
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2015, 53 (02) : 357 - 370
  • [49] Thermal network model for temperature prediction in hard disk drive
    Low, Yee Leong
    See, B. L. Ibrahim
    Tan, C. P. H.
    Mou, J. Q.
    Ong, E. H.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2009, 15 (10-11): : 1653 - 1656
  • [50] A semi-analytical model of disk evaporation by thermal conduction
    Dullemond, CP
    ASTRONOMY & ASTROPHYSICS, 1999, 341 (03) : 936 - 942
12345