Development of a mathematical model for the study of rotary- vane compressors

被引：0
|
作者：
QVALE EB
机构：
来源：
ASHRAE Transactions | 1971年 / 77卷 / pt 1期
关键词：
D O I：
暂无
中图分类号：
TB6 [制冷工程]; O51 [低温物理学];
学科分类号：
070205 ; 0807 ; 080705 ;
摘要：
A less comprehensive mathematical model of a rotary- vane compressor (RVC) was constructed and called the Lumped Model. The goal was to reduce the required computer time to about 10 sec per data point. This model provided a reasonably accurate picture of the performance of the rvc at different operating conditions. The article concentrates on the development of this Lumped Model and a discussion of the results that were obtained.
引用
收藏
页码：225 / 231
相关论文
共 50 条
  • [21] Nonlinear leakage model of rotary vane actuator
    Wang, Z. (wz20090@163.com), 1600, Beijing University of Aeronautics and Astronautics (BUAA) (40):
  • [22] PRECISION MODEL FOR MICROWAVE ROTARY VANE ATTENUATOR
    GULDBRANDSEN, T
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 1979, 28 (01) : 59 - 66
  • [23] Rotary-vane compressors. Some technical aspects of long-life lubricants
    Legeron, J.-P., 1600, (06):
  • [24] Performance investigation and design optimization of novel rotating-cylinder sliding vane rotary compressors
    Gu, Huaduo
    Ye, Fanghua
    Chen, Yaping
    Wu, Jiafeng
    Li, Weihong
    Sunden, Bengt
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2022, 142 : 137 - 147
  • [25] Development of a Sliding Vane Rotary Pump for Engine Cooling
    Cipollone, R.
    Di Battista, D.
    Contaldi, G.
    Murgia, S.
    Mauriello, M.
    69TH CONFERENCE OF THE ITALIAN THERMAL ENGINEERING ASSOCIATION, ATI 2014, 2015, 81 : 775 - 783
  • [26] A CFD model for the oil discharge ratio in rotary compressors
    Wu, Jianhua
    Hu, Jiehao
    Zhang, Jie
    Sun, Min
    Wang, Gang
    Chen, Ang
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2015, 229 (02) : 151 - 159
  • [27] Numerical investigation on flow characteristics and working performance in oil-injected sliding vane rotary compressors
    Dai, Yuande
    Zhu, Huiyang
    Bianchi, Giuseppe
    Rane, Sham
    Ye, Fanghua
    International Journal of Refrigeration, 2025, 171 : 202 - 216
  • [28] Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review
    Wen, Chengwei
    Bai, Pengpeng
    Zhang, Hang
    Zhang, Shuaijun
    Meng, Xianghui
    Meng, Yonggang
    Tian, Yu
    LUBRICANTS, 2024, 12 (08)
  • [29] Development of an internal air cooling sprayed oil injection technique for the energy saving in sliding vane rotary compressors through theoretical and experimental methodologies
    Bianchi, Giuseppe
    Cipollone, Roberto
    Murgia, Stefano
    Contaldi, Giulio
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2015, 52 : 11 - 20
  • [30] Comparative Study of the Vibrating Armature and Rotary Vane Pumps
    Turcanu, Adrian
    2017 INTERNATIONAL CONFERENCE ON ELECTROMECHANICAL AND POWER SYSTEMS (SIELMEN), 2017, : 94 - 99
12345