DEVELOPMENT OF REFRACTORIES FOR STEEL REFINING PROCESS IN KOBE STEEL.

被引：0
|
作者：
Ohsima, Ryuzo
Ohte, Akira
Takagi, Hiroshi
Sugimoto, Hiroshi
Uemura, Ken-ichiro
Miyamoto, Manabu
机构：
来源：
R and D: Research and Development Kobe Steel Engineering Reports | 1986年 / 36卷 / 01期
关键词：
STEELMAKING;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Optimization of the steel refining process is now in progress. Due to this, service conditions of refractories used for hot metal pretreatment, converter and secondary ladle refining are changed considerably. Selection of raw refractory materials and use of graphite are often effective in improving refractory qualities. However, to obtain good cost performance, improvement of operational conditions such as the appropriate slag composition and the decrease of tapping temperature is also necessary. In this paper, it is summarized how we have improved refractories and the operational methods in the steel refining process.
引用
收藏
页码：52 / 56
相关论文
共 50 条
  • [1] ROBOTIZATION OF STEEL INDUSTRY AND EXAMPLES IN KOBE STEEL.
    Hiwatashi, Takaaki
    Mishina, Kiyohiro
    Yuki, Shigeru
    R and D: Research and Development Kobe Steel Engineering Reports, 1987, 37 (02): : 3 - 6
  • [2] KOBE STEEL INTRODUCES NEW HIPED ROLL STEEL.
    Anon
    Metal Powder Report, 1986, 41 (09)
  • [3] ADVANCED REFINING PROCESS FOR PRODUCTION OF ULTRA CLEAN STEEL.
    Tani, Yukio
    Steel Times, 1983, 211 (11):
  • [4] PULSATING MIXING PROCESS FOR LADLE REFINING OF MOLTEN STEEL.
    Anon
    1600, (26):
  • [5] Vacuum Refining of Stainless Steel.
    Antoine, L.
    Cadart, M.
    Caillard, J.
    Debras, M.
    Malefant, J.Y.
    Revue de Metallurgie (Paris), 1972, 69 (11): : 717 - 721
  • [6] DEVELOPMENT OF CALCIUM TREATMENTS FOR THE REFINING OF MOLTEN IRON AND STEEL.
    Kusakawa, Takaji
    Report of the Castings Research Laboratory, Waseda University, 1983, (34): : 45 - 54
  • [7] RECENT ADVANCES IN REFRACTORIES FOR TEEMING STEEL.
    Elderfield, R.N.
    Hocking, B.C.
    Oxlade, M.G.
    Refractories Journal, 1975, 50 : 10 - 19
  • [8] PRESENT STATE OF STEELMAKING TECHNOLOGY IN KOBE STEEL.
    Ohnishi, Toshiyasu
    Soejima, Toshiyuki
    Shiwaku, Kiyoshi
    Onoye, Toshio
    R and D: Research and Development Kobe Steel Engineering Reports, 1986, 36 (01): : 3 - 8
  • [9] HORIZONTAL CONTINUOUS CASTING OF STAINLESS AT KOBE STEEL.
    Nozaki, Teruhiko
    Kawahara, Minoru
    Mori, Takasuke
    Yao, Yasutaka
    Iron and Steel Engineer, 1985, 62 (10): : 50 - 56
  • [10] Pulsating Mixing (PM) Process for Ladle Refining of Molten Steel.
    Fujii, T.
    Oguchi, Y.
    Sumida, N.
    Tachibana, R.
    Imai, T.
    Cahiers d'Informations Techniques - Revue de Metallurgie, 1986, 83 (03): : 241 - 250
12345