Analysis of large deflections in a nonsymmetrical three-point bending of beams

被引:0
|
作者
Ohtsuki, Atsumi
机构
关键词
Materials Testing--Fatigue - Mathematical Techniques--Boundary Value Problems - Stresses--Analysis;
D O I
暂无
中图分类号
学科分类号
摘要
In a bending test of engineering materials such as spring steels and plastics, a fairly large deflection is observed without exceeding the elastic limit of the materials. It is of great technological interest to know the large-deflection behavior for various loading styles. This report deals with the problem of nonlinear large deflections of a thin elastic, three-point simply supported beam with a nonsymmetrical vertical load and gives analytical solutions for typical flexible quantities such as the deflection, arc length, curvature and bending stress. Moreover, a large flexural bending test is carried out in order to confirm the applicability and reliability of the proposed theory. The experimental results are in good agreement with the ones obtained by the analytical theory. Therefore the nonlinear large-deflection theory presented in this paper can be put to practical use.
引用
下载
收藏
页码:2014 / 2018
相关论文
共 50 条
  • [41] Influence of polymer flexible joint on concrete beams in three-point bending test
    Zdanowicz, Lukasz
    Kwiecień, Arkadiusz
    Engineering Transactions, 2015, 63 (04): : 397 - 406
  • [42] Multi-scale modelling of concrete beams subjected to three-point bending
    Skarzynski, L.
    Tejchman, J.
    COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, 2010, : 703 - 710
  • [43] Collapse of clamped and simply supported composite sandwich beams in three-point bending
    Tagarielli, VL
    Fleck, NA
    Deshpande, VS
    COMPOSITES PART B-ENGINEERING, 2004, 35 (6-8) : 523 - 534
  • [44] Three-point bending of thin-walled arched beams with square sections
    Fu, Xinrong
    Zhang, Xiong
    THIN-WALLED STRUCTURES, 2023, 182
  • [45] Large deformation of corrugated sandwich panels under three-point bending
    Xia, Fukun
    Durandet, Yvonne
    Yu, T. X.
    Ruan, Dong
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (07) : 3336 - 3367
  • [46] Non-local damage analysis of three-point bending tests on SFRC notched beams.
    Ferrara, L
    Gettu, R
    FIFTH RILEM SYMPOSIUM ON FIBRE-REINFORCED CONCRETES (FRC), 2000, 15 : 357 - 367
  • [47] Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load
    Sefidi, Mahdi
    Taghipoor, Hossein
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [48] AN ANALYSIS OF LARGE DEFLECTIONS IN A SYMMETRICAL 3-POINT BENDING OF BEAM
    OHTSUKI, A
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (253): : 1988 - 1995
  • [49] AN APPROXIMATE ANALYSIS OF DEFLECTIONS OF BEAMS IN CREEP BENDING
    MECK, HR
    JOURNAL OF BASIC ENGINEERING, 1965, 87 (04): : 899 - &
  • [50] New theoretical models for the bending moment of thin-walled beams under three-point bending
    Zhang, Xiong
    Fu, Xinrong
    APPLIED MATHEMATICAL MODELLING, 2023, 121 : 21 - 42