MATHEMATICAL MODEL OF HEAT FLOW AND AUSTENITE-PEARLITE TRANSFORMATION IN EUTECTOID CARBON STEEL RODS FOR WIRE.

被引：0

作者：

Agarwal, Prakash K.

Brimacombe, J.K.

机构：

来源：

Proceedings of the Society of Photo-Optical Instrumentation Engineers | 1979年

关键词：

METALLOGRAPHY; -; Austenite;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A mathematical model incorporating both heat transfer and the transformation of austenite to pearlite in eutectoid carbon steel rods has been developed. A computer program based on the implicit finite-difference technique has been written which permits the temperature distribution and fraction of austenite transformed to be predicted as a function of cooling conditions, rod diameter and the transformation characteristics of the steel. The program takes into account the temperature-dependent heat transfer and thermophysical properties, and stresses the importance of the enthalpy of transformation. The model has been checked for internal consistency with theoretical equations, and model predictions have been compared to published industrial data for rod cooling in water at 100 degree C.

引用

共 50 条

[41] A cellular automaton model for austenite to ferrite transformation in carbon steel under non-equilibrium interface conditions
Lan, YJ
Li, DZ
Huang, CJ
Li, YY
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2004, 12 (04) : 719 - 729
[42] A mathematical model of laser surface heat-cooling treatment for medium carbon steel
Fedotov, I.
Fedotova, T.
Pityana, S. L.
Labuschange, K.
Shatalov, M.
Potgieter, J. H.
JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY, 2011, 111 (06): : 379 - 384
[43] Development of Finite Element Model of Reorientation of Cementite Lamellae in Pearlite Colonies in Wire Drawing Process for Wires Made from High Carbon Steel
Muskalski, Zbigniew
Milenin, Andrzej
MECHATRONIC SYSTEMS AND MATERIALS: MATERIALS PRODUCTION TECHNOLOGIES, 2010, 165 : 136 - +
[44] Development of finite element model of reorientation of cementite lamellae in pearlite colonies in wire drawing process for wires made from high carbon steel
Czestochowa University of Technology, Institute of Modelling and Automation of Plastic Working Processing, Armii Krajowej 19, Czestochowa
42-200, Poland
不详
Solid State Phenomena, (136-141):
[45] Constitutive flow behaviour of austenite at low temperatures and its influence on bainite transformation characteristics of ausformed medium-carbon steel
Kaikkonen, Pentti M.
Somani, Mahesh C.
Miettunen, Ilkka H.
Porter, David A.
Pallaspuro, Sakari T.
Komi, Jukka, I
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 775
[46] MATHEMATICAL-MODEL OF THE THERMAL-PROCESSING OF STEEL INGOTS .1. HEAT-FLOW MODEL
THOMAS, BG
SAMARASEKERA, IV
BRIMACOMBE, JK
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1987, 18 (01): : 119 - 130
[47] AN APPLICATION OF THE AVRAMI-EQUATION TO PREDICTING THE CONTINUOUS-COOLING AUSTENITE-]FERRITE+PEARLITE TRANSFORMATION KINETICS IN A 0.25-PERCENT-C PLAIN-CARBON STEEL
CHAU, B
HAWBOLT, EB
BRIMACOMBE, JK
CIM BULLETIN, 1984, 77 (866): : 56 - 56
[48] Optimization of flow stress in cool deformed Nb-microalloyed steel by combining strain induced transformation of retained austenite, cooling rate and heat treatment
Anijdan, S. H. Mousavi
Sediako, Dimitry
Yue, Steve
ACTA MATERIALIA, 2012, 60 (03) : 1221 - 1229
[49] A mathematical model of the heat transfer and fluid flow in AOD nozzles and its use to study the conditions at the gas/steel interface
Tilliander, A
Jonsson, TLI
Jönsson, PG
ISIJ INTERNATIONAL, 2001, 41 (10) : 1156 - 1164
[50] COUPLED TEMPERATURE, STRESS, PHASE-TRANSFORMATION CALCULATION MODEL NUMERICAL ILLUSTRATION OF THE INTERNAL-STRESSES EVOLUTION DURING COOLING OF A EUTECTOID CARBON-STEEL CYLINDER
DENIS, S
SJOSTROM, S
SIMON, A
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (07): : 1203 - 1212

← 1 2 3 4 5 →