Study of the damage of AA 8006 twin-roll cast thin sheets during forming of heat exchanger fins

被引：0

作者：

Karlík, M. ^{[1
]}

Siegl, J. ^{[1
]}

Slámová, M. ^{[2
]}

Birol, Y. ^{[3
]}

机构：

[1] Department of Materials, Czech Technical University in Prague, Fac. of Nucl. and Phys. Engineering, Trojanova 13, CZ-120 00 Prague 2, Czech Republic

[2] Research Institute for Metals, Ltd., Paneské Břežany, CZ-250 70 Odolena Voda, Czech Republic

[3] Tübitak, Marmara Research Center, Gebze, Kocaeli, Turkey

来源：

Materials Science Forum | 2000年 / 331卷

关键词：

Crack initiation - Crystal structure - Deep drawing - Electron microscopy - Fins (heat exchange) - Formability - Grain size and shape - Heat exchangers - Intermetallics - Particle size analysis - Sheet metal - Strip metal;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A study of typical cracks which occur during forming operations of heat exchanger fins from strip-cast Al-Fe-Mn-Si (AA 8006) alloy sheets is presented. A number of failed heat exchanger lamellae, 0.10 to 0.25 mm thick, were examined by light and electron microscopy. Formability of the material correlates rather well with the grain structure and the distribution of second phase particles in the matrix. Sheets having good formability usually contain coarser intermetallic particles when compared with sheets torn during deep drawing operations. It was found that failure was due to surface grain size inhomogeneity in many cases, therefore a uniform grain structure is also favorable for improved formability.

引用

共 29 条

[21] Microstructure evolution of twin-roll cast AA5xxx alloys during homogenisation-like annealing
Slamova, M
Birol, Y
Dündar, M
Akkurt, AS
Janecek, M
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 711 - 716
[22] 3D ANALYSIS OF MACROSEGREGATION IN TWIN-ROLL CAST AA3003 ALLOY BEFORE AND AFTER HEAT TREATMENT
Bajer, Jan
Zaunschirm, Stefan
Slapakova, Michaela
Zimina, Mariia
Plank, Bernhard
Cieslar, Miroslav
Kastner, Johann
27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 1351 - 1357
[23] FORMING MECHANICS OF A TWIN-ROLL CAST AA1100/409L CLAD SHEET AFTER ANNEALING AND COLD ROLLING
Chen, Gang
Wang, Zonghua
Wang, Yuanxin
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, 2024, 19 (02) : 251 - 264
[24] Forming limit diagrams of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and loading rate
Berge, F.
Krueger, L.
Ullrich, C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 614 : 27 - 35
[25] Controlling the Microstructural Evolution During Soft Annealing of Cold Rolled Twin-Roll Cast AlMnMg Alloys by Homogenization Heat Treatment
Meydanoglu, Onur
Isiksacan, Cemil
Gunyuz, Mert
Altuner, Hatice Mollaoglu
LIGHT METALS 2018, 2018, : 953 - 958
[26] Interfacial Reaction in Twin-Roll Cast AA1100/409L Clad Sheet During Different Sequence of Cold Rolling and Annealing
Chen, Gang
Xu, Guangming
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (08) : 3013 - 3025
[27] Interfacial Reaction in Twin-Roll Cast AA1100/409L Clad Sheet During Different Sequence of Cold Rolling and Annealing
Gang Chen
Guangming Xu
Metals and Materials International, 2021, 27 : 3013 - 3025
[28] Effect of Homogenization Heat Treatment on Elongation Anisotropy in Cold-Rolled and Annealed Al-Si Alloy Sheets Fabricated from Vertical-Type High-Speed Twin-Roll Cast Strips
Takehara, Yuji
Ito, Yuki
Nguyen, Thai Ha
Harada, Yohei
Muraishi, Shinji
Kumai, Shinji
MATERIALS TRANSACTIONS, 2023, 64 (02) : 379 - 384
[29] Evolution of shear texture during the asymmetric rolling and its annealing behavior in a twin-roll casting AA6016 sheet: an ex-situ electron backscatter diffraction study
Ren, Xianwei
Zhang, Xieyi
Huang, Yuanchun
Liu, Yu
Zhao, Likai
Zhou, Wenlong
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 6420 - 6433

← 1 2 3 →