EFFECT OF THE DESIGN PARAMETERS OF HEAVY LATHE CUTTING TOOLS ON THEIR STRENGTH AND WEAR RESISTANCE.

被引：0
|
作者：
Lelchuk, S.M.
Mironenko, E.V.
机构：
来源：
Machines & tooling Melton Mowbray | 1980年 / 51卷 / 10期
关键词：
LATHES; -; Tools; Jigs and Fixtures;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The dependence of tool life upon the thickness of the cemented carbide insert and holder shank cross-section has been determined experimentally for rough turning on heavy lathes. Based on the data obtained and also by comparing it with results of earlier investigations, tables were composed for the appropriate feed and cutting speed correction factors to be used with the existing standards for machining conditions on heavy lathes.
引用
收藏
页码：19 / 20
相关论文
共 50 条
  • [31] Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings
    Fox-Rabinovich, GS
    Beake, BD
    Endrino, JL
    Veldhuis, SC
    Parkinson, R
    Shuster, LS
    Migranov, MS
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21): : 5738 - 5742
  • [32] The effect of cutting parameters and cutting tools on machining performance of carbon graphite material
    Tankus, Kani
    Tascioglu, Emre
    Atay, Gokhan
    Brunken, Hayo
    Kaynak, Yusuf
    MACHINING SCIENCE AND TECHNOLOGY, 2020, 24 (01) : 96 - 111
  • [33] EFFECT OF BUILT-UP-EDGE(BUE) ON WEAR OF CUTTING TOOLS
    RAMASWAMI, R
    WEAR, 1971, 18 (01) : 1 - +
  • [34] Effect of grain refinement and composition on the wear of cemented carbide cutting tools
    Cheng, Jianbing
    Pang, Siqin
    Wang, Xibin
    Yu, Qixun
    RESEARCH IN MECHANICAL ENGINEERING AND MATERIAL SCIENCE, 2014, 456 : 507 - +
  • [35] Cutting Performance and Wear Characteristics of Chromium Nitride Coated Tools III. Edge wear of finger joint cutters and its effect on joint strength
    Tsuchiya, Atsushi
    Fujiwara, Yuko
    Okumura, Shogo
    MOKUZAI GAKKAISHI, 2010, 56 (04): : 243 - 250
  • [36] CONSTRICTION-RESISTANCE CONCEPT APPLIED TO WEAR MEASUREMENT OF METAL-CUTTING TOOLS
    WILKINSON, AJ
    PROCEEDINGS OF THE INSTITUTION OF ELECTRICAL ENGINEERS-LONDON, 1971, 118 (02): : 381 - +
  • [37] Improving wear resistance and machining performance of diamond tools in ferrous metals cutting: A review
    Song, Chaosheng
    Xiang, Daohui
    Zhao, Bo
    An, Qinglong
    Li, Xuekun
    Wang, Dazhong
    Jiao, Feng
    Gao, Guofu
    Cui, Xiaobin
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2024, 334
  • [38] Investigation of Basic Parameters of Lathe Turning of Low-Machinability Steels With Cutting Tools Covered by Solid Lubricants.
    Gogolev, A.Ya.
    Kuchugurenko, R.V.
    1600,
  • [39] Design of Dimensional Parameters of Chip Breaker Groove for PCD Cutting Tools
    Chi J.
    Yu A.
    Wu M.
    Yuan J.
    Chen Q.
    Sun L.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2022, 33 (03): : 299 - 309
  • [40] Effect of cutting parameters on tool wear, cutting force and surface roughness in machining of MDN431 alloy using Al and Fe coated tools
    Badiger, Pradeep V.
    Desai, Vijay
    Ramesh, M. R.
    Prajwala, B. K.
    Raveendra, K.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (01)
12345