SURFACE SEGREGATION OF PHOSPHORUS IN TITANIUM STABILIZED AND COLD-WORKED AUSTENITIC STAINLESS STEEL.

被引：0
|
作者：
Tvrdy, M. [1 ]
Hyspecka, L. [1 ]
Seidl, R. [1 ]
Mazanec, K. [1 ]
机构：
[1] Vitkovice Engineering &, Metallurgical Research Inst,, Ostrava, Czech, Vitkovice Engineering & Metallurgical Research Inst, Ostrava, Czech
来源：
| 1988年 / 9卷 / 02期
关键词：
PHOSPHORUS; -; SPECTROSCOPY; AUGER ELECTRON - STEEL CORROSION - Stress Corrosion Cracking - TITANIUM AND ALLOYS;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Auger Electron Spectroscopy (AES) is applied to examine the surface segregation activity of phosphorus in AISI 321 titanium stabilized and cold-worked austenitic stainless steel which was annealed at temperatures ranging from 400 degree to 1000 degree C. An increase in deformation is found for the temperature interval 400-600 degree C which corresponded to a pronounced surface segregation of phosphorus. This was not observed in the undeformed state of the material. A gradual reversal of segregation pattern is observed when the specimens are reheated successively to higher temperatures. Such information can be useful for the better understanding of the gradual deterioration of austenitic stainless steel exposed to service temperatures.
引用
收藏
页码：161 / 164
相关论文
共 50 条
  • [41] Microstructure Evolution During Creep of Cold Worked Austenitic Stainless Steel
    Yadav, Hari Krishan
    Ballal, A. R.
    Thawre, M. M.
    Vijayanand, V. D.
    INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346
  • [42] EFFECT OF SUPERPOSED MEAN AND ALTERNATING STRESSES ON THE FATIGUE HARDENING - FATIGUE SOFTENING BEHAVIOUR OF COLD WORKED AUSTENITIC STAINLESS STEEL.
    Prabhakara Sarma, D.
    Vesudevan, R.
    Materialpruefung/Materials Testing, 1978, 20 (05): : 192 - 196
  • [43] Irradiation-induced deformation in cold-worked SUS 304 stainless steel
    Ueno, Keiko
    Nagakawa, Johsei
    Murase, Yoshiharu
    Yamamoto, Norikazu
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2006, 43 (06) : 669 - 674
  • [44] ANOMALY IN DILATATION ON HEATING OF COLD-WORKED 18-8 STAINLESS STEEL
    IMAI, Y
    SAITO, T
    SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1965, 17 (01): : 13 - &
  • [45] Mechanical degradation of cold-worked 304 stainless steel in salt spray environments
    Chiang, M. F.
    Hsu, H. H.
    Young, M. C.
    Huang, J. Y.
    JOURNAL OF NUCLEAR MATERIALS, 2012, 422 (1-3) : 58 - 68
  • [46] RELAXATION PEAKS OF COLD-WORKED 304L STAINLESS-STEEL
    IGATA, N
    CHEN, HB
    MIYAHARA, K
    UBA, T
    JOURNAL DE PHYSIQUE, 1981, 42 (NC5): : 193 - 198
  • [47] PITTING RESISTANCE OF COLD-WORKED COMMERCIAL AUSTENITIC STAINLESS-STEELS IN SOLUTION SIMULATING SEAWATER
    MAZZA, B
    PEDEFERRI, P
    SINIGAGLIA, D
    CIGADA, A
    MONDORA, GA
    RE, G
    TACCANI, G
    WENGER, D
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1979, 126 (12) : 2075 - 2081
  • [48] DERIVATION OF A SIMPLE VOID-SWELLING EQUATION FOR COLD-WORKED 316 AUSTENITIC STEEL
    HAYNS, MR
    GALLAGHER, J
    BULLOUGH, R
    JOURNAL OF NUCLEAR MATERIALS, 1978, 78 (02) : 236 - 253
  • [49] Swelling of cold-worked austenitic stainless steels irradiated in HFIR under spectrally tailored conditions
    Wakai, E
    Hashimoto, N
    Robertson, JP
    Sawai, T
    Hishinuma, A
    JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (1 SUPPL.) : 352 - 356
  • [50] ACOUSTIC-EMISSION DURING TENSILE DEFORMATION OF ANNEALED AND COLD-WORKED AISI TYPE 304 AUSTENITIC STAINLESS-STEEL
    MUKHOPADHYAY, CK
    KASIVISWANATHAN, KV
    JAYAKUMAR, T
    RAJ, B
    JOURNAL OF MATERIALS SCIENCE, 1993, 28 (01) : 145 - 154
12345