Formation of Cu-Hf-Ti bulk metallic glasses

被引：0
|
作者：
Figueroa, I.A. [1 ]
Davies, H.A. [1 ]
Todd, I. [1 ]
机构：
[1] Department of Engineering Materials, University of Sheffield, Sheffield, S1 3JD, United Kingdom
来源：
Journal of Alloys and Compounds | 2007年 / 434-435卷 / SPEC. ISS.期
关键词：
Alloys of composition Cu55Hf45-xTix with 5 &le x &le 45 at.% and Cu65Hf35-xTix with 5 &le x &le 35 at.% have been investigated. Samples were chill block melt spun to ribbon and produced as cylindrical rods by suction casting into a stepped copper die. All alloys investigated in both series were fully vitrified when melt spun to ribbon of thickness ∼25 μm. The compositions x = 20 and 25 within the Cu55Hf45-xTix series and x = 15 and 20 within the Cu65Hf35-xTix series were found to be the best glass formers; with no crystalline phases detected by XRD for 3 and 4 mm diameter sections; respectively. The composition ranges of highest GFA also had the highest reduced glass temperatures for each of the ranges studied. © 2006 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：164 / 166
相关论文
共 50 条
  • [21] Thermal and Elastic Properties of Cu-Hf-Al Bulk Metallic Glasses
    Choi-Yim, Haein
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2012, 60 (03) : 485 - 487
  • [22] Thermal and elastic properties of Cu-Hf-Al bulk metallic glasses
    Haein Choi-Yim
    Journal of the Korean Physical Society, 2012, 60 : 485 - 487
  • [23] Role of minor addition of metallic alloying elements in formation and properties of Cu–Ti-rich bulk metallic glasses
    E.S. Park
    H.J. Chang
    J.S. Kyeong
    D.H. Kim
    Journal of Materials Research, 2008, 23 : 1995 - 2002
  • [24] Role of minor addition of metallic alloying elements in formation and properties of Cu-Ti-rich bulk metallic glasses
    Park, E. S.
    Chang, H. J.
    Kyeong, J. S.
    Kim, D. H.
    JOURNAL OF MATERIALS RESEARCH, 2008, 23 (07) : 1995 - 2002
  • [25] Formation and Corrosion Behavior of Mechanically-Alloyed Cu-Zr-Ti Bulk Metallic Glasses
    Lee, Pee-Yew
    Cheng, Yeh-Ming
    Chen, Jyun-Yu
    Hu, Chia-Jung
    METALS, 2017, 7 (04):
  • [26] Formation of Ti-Zr-Cu-Ni-Sn-Si bulk metallic glasses with good plasticity
    Yin, Enhuai
    Zhang, Min
    Pang, Shujie
    Zhao, Xiangjin
    Zhang, Tao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S10 - S13
  • [27] Cu-Zr-Al (Ti) bulk metallic glasses: Cluster selection rules and glass formation
    Wang, Q.
    Qiang, J. B.
    Xia, J. H.
    Wu, J.
    Wang, Y. M.
    Dong, C.
    INTERMETALLICS, 2007, 15 (5-6) : 711 - 715
  • [28] Formation and properties of Zr-(Ti, Nb)-Cu-Ni-Al bulk metallic glasses
    Wang, WH
    Wang, RJ
    Fan, GJ
    Eckert, J
    MATERIALS TRANSACTIONS, 2001, 42 (04) : 587 - 591
  • [29] Thermal stability, corrosion resistance, and surface analysis of Cu-Hf-Ti-Ni-Nb bulk metallic glasses
    Qin, C. L.
    Zhang, W.
    Asami, K.
    Ohtsu, N.
    Inoue, A.
    JOURNAL OF MATERIALS RESEARCH, 2009, 24 (02) : 316 - 323
  • [30] Formation and composition optimization of Cu-based bulk metallic glasses in Cu-Zr-Ti ternary system
    Wang, Q
    Qiang, JB
    Wang, YM
    Xia, JH
    Lin, Z
    Zhang, XF
    Dong, C
    ACTA PHYSICA SINICA, 2006, 55 (01) : 378 - 385
12345