Effect of heat treatment on microstructures and properties of Fe-B-C alloy

被引：0

作者：

Fu, Hanguang ^{[1
,3
]}

Song, Xuding ^{[2
]}

Liu, Haiming ^{[2
]}

Lei, Yongping ^{[1
]}

Cheng, Xiaole ^{[3
]}

Xing, Jiandong ^{[3
]}

机构：

[1] Beijing University of Technology, Beijing 100124, China

[2] Chang'an University, Xi'an 710064, China

[3] Xi'an Jiaotong University, Xi'an 710049, China

来源：

Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2010年 / 39卷 / 06期

关键词：

Solidification - Dynamic loads - Hardness - Iron alloys - Borides - Heat resistance - Martensite - Microstructure - Quenching;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The solidification process and solidification structures of Fe-B-C alloy containing 1.4%-2.0% B and 0.4%-0.6% C were researched. The change of microstructures, mechanical properties and wear resistance of the alloy at different quenching temperatures were also studied. The results show that the solidification structures of Fe-B-C alloy consist of borides such as Fe2B, Fe3(C, B) and Fe23(C, B)6 and metallic matrix such as martensite, pearlite and ferrite. The part of boride network is broken and there is no new phase after quenching. The matrix transforms into the single martensite completely and the hardness exceeds 55 HRC. The hardness of Fe-B-C alloy increases while the impact toughness has no obvious change with increase of the quenching temperature. Under the conditions of static load pin-on-disc wear and dynamic load impact wear, Fe-B-C alloy has excellent wear resistance and the quenching temperature has no marked effect on the wear resistance. © 2010, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.

引用

页码：1125 / 1128

共 50 条

[11] A study of abrasion resistant cast Fe-B-C alloy
Fu Hanguang
Jiang Zhiqiang
ACTA METALLURGICA SINICA, 2006, 42 (05) : 545 - 548
[12] Mechanical and Corrosion Properties of Fe-B-C Alloys
Sukhova, O. V.
MATERIALS SCIENCE, 2024, 59 (05) : 554 - 560
[13] Effect of molybdenum addition on fracture toughness and hardness of Fe2B in Fe-B-C cast alloy
Huang, Zhifu
Xing, Jiandong
Tao, Xiang
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (12) : 1539 - 1543
[14] Effect of heat treatment on microstructure and properties of wear resistant cast Fe-C-B alloy
Song, Xu-Ding
Fu, Han-Guang
Yang, Jun
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2008, 29 (01): : 38 - 41
[15] Effect of Heat Treatment on Microstructure and Mechanical Properties of Fe–C–Cr–V–B–Si Alloy
Mrinal Jyoti Sarma
Pankaj Kumar Das
Transactions of the Indian Institute of Metals, 2023, 76 : 3323 - 3331
[16] Effect of variable heat treatment modes on microstructures in Fe-Cr-B cast iron alloy
Guo Changqing
Wang Caidong
Liu Xiaoping
P. M Kelly
CHINA FOUNDRY, 2008, 5 (01) : 28 - 31
[17] Effects of heat treatment on the microstructures and mechanical properties of βc titanium alloy
Lin, Yongxin
Zhang, Guoxin
Chen, Jun
Yang, Guanjun
Deng, Ju
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 27 (02): : 75 - 78
[18] Effects of heat treatment on the microstructures and mechanical properties of βc titanium alloy
Lin, YX
Zhang, GX
Chen, J
Yang, GJ
Deng, J
RARE METAL MATERIALS AND ENGINEERING, 1998, 27 (02) : 75 - 78
[19] Effects of Heat Treatment on the Microstructures and Mechanical Properties of βC Titanium Alloy
Yongxin, Lin
Guoxin, Zhang
Jun, Chen
Guanjun, Yang
Ju, Deng
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 1998, 27 (02):
[20] Effect of Heat Treatment on Microstructure and Mechanical Properties of Fe-C-Cr-V-B-Si Alloy
Sarma, Mrinal Jyoti
Das, Pankaj Kumar
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (12) : 3323 - 3331

← 1 2 3 4 5 →