Characterization of a rapidly annealed Ti50Ni25Cu25 melt-spun ribbon

被引：0
|
作者：
Tong, Yunxiang [1 ]
Liu, Yong [1 ]
Xie, Zeliang [2 ]
机构：
[1] School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, 639798, Singapore
[2] School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
来源：
Journal of Alloys and Compounds | 2008年 / 456卷 / 1-2期
关键词：
In the present paper; crystallization behavior; martensitic transformation and deformation behavior of a Ti50Ni25Cu25 ribbon annealed at 400 °C under rapid heating were studied. The initially amorphous ribbon was fully crystallized under rapid thermal annealing at 400 °C for 30 s. However; under conventional thermal annealing; crystallization temperature was above 450 °C. The crystallization at low temperature under rapid heating was attributed to the release of the extra energy due to the annihilation of free-volume in amorphous state. With increasing the annealing time; martensitic transformation temperatures increased. The ribbon annealed at 400 °C for 300 s has developed good shape recovery properties. A 2.7% one-way memory strain was obtained the tensile strain of 5.5%. The deformation behavior showed non-flat stress-plateau and high spring-back; which is discussed in terms of grain size and orientation distribution of martensite variants. © 2007 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：170 / 177
相关论文
共 50 条
  • [41] Pseudoelasticity response of aged Ti50Ni25Cu25 shape memory ribbon under nanoindentation tests
    Chen, Chih-Hsuan
    Wang, Hsin-Kai
    Wu, Shyi-Kaan
    INTERMETALLICS, 2015, 64 : 78 - 85
  • [42] Ti50Ni25Cu25 Amorphous Alloy Ribbons Progress
    Yang, Zhihuai
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 3912 - 3915
  • [43] Evolution of local atomic structure in a melt-spun Ni25Ti50Cu25 shape memory alloy during crystallization
    Zarinejad, Mehrdad
    Liu, Yong
    Liu, Tao
    White, Tim
    Yang, Ping
    Chen, Qiming
    PHILOSOPHICAL MAGAZINE, 2011, 91 (03) : 404 - 420
  • [44] Phase transformations and precipitation in amorphous Ti50Ni25Cu25 ribbons
    Satto, C
    Ledda, A
    Potapov, P
    Janssens, JF
    Schryvers, D
    INTERMETALLICS, 2001, 9 (05) : 395 - 401
  • [45] The effect of hydrogen on crystallization of a Ti50Ni25Cu25 amorphous alloy
    Spivak, LV
    Skryabina, NE
    Fruchard, D
    Shelyakov, AV
    TECHNICAL PHYSICS LETTERS, 2004, 30 (10) : 799 - 801
  • [46] Effect of hydrogen on damping capacity of Ti50Ni25Cu25 alloy
    Sakaguchi, T
    Ueura, T
    Kogo, Y
    Takeuchi, S
    Igata, N
    MATERIALS TRANSACTIONS, 2005, 46 (06) : 1306 - 1310
  • [47] The effect of hydrogen on crystallization of a Ti50Ni25Cu25 amorphous alloy
    L. V. Spivak
    N. E. Skryabina
    D. Fruchard
    A. V. Shelyakov
    Technical Physics Letters, 2004, 30 : 799 - 801
  • [48] Internal friction of Ti-rich Ti-Ni-Cu melt-spun ribbon
    He, Wenjun
    Min, Guanghui
    Yin, Yansheng
    Tolochko, O. V.
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 231 - +
  • [49] Crystallization of Mechanically Alloyed Ni50Ti50 and Ti50Ni25Cu25 Shape Memory Alloys
    Salwa, Piotr
    Goryczka, Tomasz
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (05) : 2848 - 2852
  • [50] Crystallization of Mechanically Alloyed Ni50Ti50 and Ti50Ni25Cu25 Shape Memory Alloys
    Piotr Salwa
    Tomasz Goryczka
    Journal of Materials Engineering and Performance, 2020, 29 : 2848 - 2852
12345