Modelling and experimental verification of heat dissipation mechanisms in an SU-8 electrothermal microgripper

被引:0
|
作者
Solano, Belen [1 ,2 ]
Merrell, James [1 ]
Gallant, Andrew [1 ]
Wood, David [1 ]
机构
[1] School of Engineering and Computing Sciences, South Road, Durham,DH1 3LE, United Kingdom
[2] Centro Universitario de la Defensa, Zaragoza,50090, Spain
关键词
Dissipation methods - Electrothermal - Experimental verification - Heat dissipation mechanism - Microgripper - SU-8 - Subatmospheric pressures - Theoretical modeling;
D O I
暂无
中图分类号
学科分类号
摘要
Within this work, a microgripper based on a hot-cold arm principle was tested to give a greater understanding of the associated heat dissipation methods. Experiments were conducted in air at atmospheric and sub-atmospheric pressure, and in helium, argon and helium at sub-atmospheric pressure. The change in deflection, when using gases with different thermal conductivities and at varying pressures showed the significance of conduction through the atmosphere. The experimental results were found to verify a theoretical model created previously by this group, and a further model developed independently; both predicted the deflection that a given current would cause. © 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:90 / 93
相关论文
共 50 条
  • [21] Metallic microgripper with SU-8 adaptor as end-effectors for heterogeneous micro/nano assembly applications
    Kim, K
    Nilsen, E
    Huang, T
    Kim, A
    Ellis, M
    Skidmore, G
    Lee, JB
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (10): : 689 - 693
  • [22] A comprehensive study on the self-lubrication mechanisms of SU-8 composites
    Saravanan, Prabakaran
    Sinha, Sujeet K.
    Jayaraman, Sundaramurthy
    Duong, Hai M.
    TRIBOLOGY INTERNATIONAL, 2016, 95 : 391 - 405
  • [23] Experimental study of ultrasonic stress relief used in SU-8 photoresist
    Du, Li-Qun
    Wang, Yu
    Wang, Qi-Jia
    Chen, Li
    Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, 2010, 50 (06): : 907 - 911
  • [24] Experimental research on adhesive characteristics between SU-8 resist and substrate
    Liu, Jing-Quan
    Zhu, Jun
    Cai, Bing-Chu
    Chen, Di
    Ding, Gui-Fu
    Zhao, Xiao-Lin
    Yang, Chun-Sheng
    Weixi Jiagong Jishu/Microfabrication Technology, 2002, (02):
  • [25] Rectilinear Electrothermal Actuator using High-Aspect-Ratio Micromachined Composite of SU-8 and Silicon
    Thubthimthong, Borriboon
    Lau, Gih-Keong
    Matham, Murukeshan Vadakke
    NEXT GENERATION MICRO/NANO SYSTEMS, 2013, 81 : 28 - 33
  • [26] Micro heat flux sensor using copper electroplating in SU-8 microstructures
    Oh, SH
    Lee, KC
    Chun, J
    Kim, M
    Lee, SS
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2001, 11 (03) : 221 - 225
  • [27] Experimental study on ultrasonic stress relief for cured SU-8 photoresist layer
    Du Liqun
    Wang Qijia
    MICROELECTRONIC ENGINEERING, 2010, 87 (12) : 2555 - 2560
  • [28] Experimental and Finite Element Study of Tribological Characteristics of SU-8 Thin Film
    Yang, Woo Yul
    Shin, Myounggeun
    Kim, Hyung Man
    Han, Sangchul
    Sung, In-Ha
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2013, 37 (04) : 467 - 473
  • [29] Effects of heat curing on adhesive strength between microsized SU-8 and Si substrate
    Ishiyama, C.
    Sone, M.
    Higo, Y.
    EMLC 2007: 23RD EUROPEAN MASK AND LITHOGRAPHY CONFERENCE, 2007, 6533
  • [30] SU-8 microcantilever with an aperture, fluidic channel, and sensing mechanisms for biological and other applications
    Gaitas, Angelo
    Hower, Robert W.
    JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 2014, 13 (03):