Effect of process parameters for wirecut electric discharge machining of cladded SS304

被引：0
|
作者：
Britto Joseph G. [1 ]
Praveenkumar A. [2 ]
Durairaj R.B. [1 ]
Mageshwaran G. [1 ]
Sriram V. [1 ]
Jeevahan J. [1 ]
机构：
[1] School of Mech. Engg., Sathyabama Inst. of Sci. and Tech., Chennai, Tamil Nadu
[2] Dept. of Mech. Engg., Sathyabama Inst. of Sci. and Tech., Chennai, Tamil Nadu
来源：
International Journal of Vehicle Structures and Systems | 2019年 / 11卷 / 04期
关键词：
Kerf width; Surface roughness; Taguchi; Wirecut electric discharge machining;
D O I：
10.4273/ijvss.11.4.08
中图分类号：
学科分类号：
摘要：
The usage of cladded materials is grown in automobile industry. However, cutting of cladded material is considered as a challenging task because of its heterogeneous nature, therefore it is often subjected to thermal cutting like plasma arc cutting or gas cutting process. Wirecut Electric Discharge Machining (WEDM) is a competent alternate for good surface finish but this process offers relatively low level of cutting. The objective of this work is to identify the optimal values of WEDM process parameters such as pulse on time, table feed and working time and then study their effects on the surface roughness and Kerf width. © 2019. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：381 / 385
页数：4
相关论文
共 50 条
  • [21] Effect of wire materials on performance during WEDM of SS304
    Jayakumar, K.
    Suresh, T.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 606 - 610
  • [22] Effect of process parameters on change in hardness during magnetic abrasive finishing of stainless steel SS304 using RSM method
    Gill, Jagdeep Singh
    Singh, Lakhvir
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 2145 - 2151
  • [23] STUDY OF THE PARAMETRIC VARIATION FOR ARGON GLOW-DISCHARGE CONDITIONING OF SS304
    ANJALI, S
    GOGAWALE, SV
    RAMANATHAN, D
    [J]. VACUUM, 1994, 45 (01) : 41 - 44
  • [24] Effect of process parameters on change in hardness during magnetic abrasive finishing of stainless steel SS304 using RSM method
    Gill, Jagdeep Singh
    Singh, Lakhvir
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 2145 - 2151
  • [25] Parametric Evaluation and Optimization of Laser Machining of SS304 Using Response Surface Methodology
    Vikas B. Magdum
    Jayant K. Kittur
    Sachin C. Kulkarni
    [J]. Journal of Materials Engineering and Performance, 2023, 32 : 6486 - 6495
  • [26] Investigation of electrochemical machining on SS304 using NaCl and NaNo3 as electrolyte
    Deepak, J.
    Hariharan, P.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (15) : 1790 - 1803
  • [27] Parametric Evaluation and Optimization of Laser Machining of SS304 Using Response Surface Methodology
    Magdum, Vikas B.
    Kittur, Jayant K.
    Kulkarni, Sachin C.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (14) : 6486 - 6495
  • [28] Optimization of process parameters in Electro Discharge Machining of AISI 304 stainless steel
    Behera, Asit
    Panda, Debashrita
    Bhadauriya, Mayank
    [J]. 3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018, 2018, 390
  • [29] Design of Multi-material Model for Wire Electro-discharge Machining of SS304 and SS316 Using Machine Learning and MCDM Techniques
    Biswas, Shatarupa
    Singh, Yogesh
    Mukherjee, Manidipto
    Datta, Shubhabrata
    Barman, Swapan
    Raja, Manivannan
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (12) : 15755 - 15778
  • [30] Design of Multi-material Model for Wire Electro-discharge Machining of SS304 and SS316 Using Machine Learning and MCDM Techniques
    Shatarupa Biswas
    Yogesh Singh
    Manidipto Mukherjee
    Shubhabrata Datta
    Swapan Barman
    Manivannan Raja
    [J]. Arabian Journal for Science and Engineering, 2022, 47 : 15755 - 15778
12345