Effect of polyethylene glycol on the microstructure of freeze-cast alumina

被引:0
|
作者
Pekor, Christopher M. [1 ]
Kisa, Predrag [1 ]
Nettleship, Ian [1 ]
机构
[1] Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261, United States
来源
关键词
Freeze casting has been used to process a range of ceramics with oriented pore structures; and soluble polymers are often used to improve the strength of the material before sintering. This study examined the effect of polyethylene glycol (PEG) on the three distinct microstructural scales; which include the colony size; the pore size; and the secondary dendrite spacing. The results showed that the trends in pore size and secondary dendrite spacing were consistent with the effect of constitutional supercooling on the growth of ice crystals. In contrast; the effect of PEG on colony size appeared to be more pronounced and may reflect preferential adsorption on the prism faces of the growing ice crystals. For both alumina and PEG content; the observed effects were very much dependent on the temperature of the chill surface used in casting. © 2008 The American Ceramic Society;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:3185 / 3190
相关论文
共 50 条
  • [21] Control over the mechanical properties of surface-magnetized alumina magnetically freeze-cast scaffolds
    Maddie A. Schmitz
    Isaac Nelson
    Steven E. Naleway
    Journal of Materials Science, 2023, 58 : 17154 - 17174
  • [22] Production and Characterization of a Silica-Alumina Membrane Using Novel Tubular Freeze-Cast Substrates
    Athayde, Daniel Dornellas
    Amado Dolabella, Ana Clara
    Dias, Bruno Cunha
    Sousa, Bruno Maciel
    da Silva, Debora Guimariles
    Leite Vasconcelos, Daniela Cordeiro
    Vasconcelos, Wander Luiz
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (02):
  • [23] Insights into the macroporosity of freeze-cast hierarchical geopolymers
    Papa, Elettra
    Medri, Valentina
    Benito, Patricia
    Vaccari, Angelo
    Bugani, Simone
    Jaroszewicz, Jakub
    Landi, Elena
    RSC ADVANCES, 2016, 6 (29) : 24635 - 24644
  • [24] Surface-oxidized, freeze-cast cobalt foams: Microstructure, mechanical properties and electrochemical performance
    Park, Hyeji
    Cho, Hoon-Hwe
    Kim, Kyungbae
    Hong, Kicheol
    Kim, Jae-Hun
    Choe, Heeman
    Dunand, David C.
    ACTA MATERIALIA, 2018, 142 : 213 - 225
  • [25] Effect of processing parameters on the properties of freeze-cast Ni wick with gradient porosity
    Lloreda-Jurado, P. J.
    Chicardi, E.
    Paul, A.
    Sepulveda, R.
    MATERIALS & DESIGN, 2021, 206
  • [26] Fabrication and characterization of robust freeze-cast alumina scaffolds with dense ceramic walls and controllable pore sizes
    Sun, Meng-Qi
    Shen, Ping
    Jiang, Qi-Chuan
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (07) : 5224 - 5235
  • [27] NANOPARTICLE COLLOIDAL SUSPENSION OPTIMIZATION AND FREEZE-CAST FORMING
    Lu, Kathy
    Kessler, Chris S.
    SYNTHESIS AND PROCESSING OF NANOSTRUCTURED MATERIALS, 2007, 27 (08): : 1 - 10
  • [28] Processing and Characterization of Directionally Freeze-cast Copper Foams
    Ramos, A. I. Cuba
    Dunand, D. C.
    POROUS METALS AND METALLIC FOAMS, METFOAM 2011, 2012, : 215 - 220
  • [29] Fabrication and characterization of robust freeze-cast alumina scaffolds with dense ceramic walls and controllable pore sizes
    Meng-Qi Sun
    Ping Shen
    Qi-Chuan Jiang
    Journal of Materials Science, 2019, 54 : 5224 - 5235
  • [30] Mechanical properties of directionally freeze-cast titanium foams
    Li, Jessica C.
    Dunand, David C.
    ACTA MATERIALIA, 2011, 59 (01) : 146 - 158