Structure and properties of calcium and strontium treated Al-7Si-0.3Mg alloy: A comparison

被引：0
|
作者：
Kumari, S.S. Sreeja [1 ]
Pillai, R.M. [1 ]
Pai, B.C. [1 ]
机构：
[1] Materials and Minerals Division, Regional Research Laboratory (CSIR)-Trivandrum, Industrial Estate P.O, Pappanamcode, Trivandrum, Kerala 695 019, India
来源：
Journal of Alloys and Compounds | 2008年 / 460卷 / 1-2期
关键词：
The modification effect of Ca on the structure and properties of Al-7Si-0.3Mg alloy has been investigated and compared with the well-known modifier; Sr. The optimum level of Ca for achieving modification and best mechanical properties lies in the range of 0.0085-0.017%. Higher amount of Ca than this level leads to the formation of higher porosity and Al-Ca-Si intermetallics. Sr shows more porosity than Ca at 0.018% level in the alloy. The properties obtained with Ca modification are at par with those obtained with the well-known modifier; Sr. © 2007 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：472 / 477
相关论文
共 50 条
  • [41] Effect of the Spinning Deformation Processing on Mechanical Properties of Al-7Si-0.3Mg Alloys
    Cheng, Yin-Chun
    Lin, Chih-Kuang
    Tan, An-Hung
    Hsu, Shih-Yuan
    Lee, Sheng-Long
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (09) : 1873 - 1878
  • [42] Gas Quenching during Age Hardening of the Aluminium Casting Alloy Al-7Si-0.3Mg
    A. Rose
    O. Kessler
    F. Hoffmann
    H.W. Zoch
    材料热处理学报, 2004, (05) : 498 - 501
  • [43] An investigation on semi-solid Al-7Si-0.3Mg alloy produced by mechanical stirring
    Haghayeghi, R
    Zoqui, EJ
    Halvaee, A
    Emamy, M
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (03) : 382 - 387
  • [44] Electropolishing of Al-7Si-0.3Mg cast alloy by using perchloric and nitric acid electrolytes
    Murali, S
    Ramachandra, M
    Murthy, KSS
    Raman, KS
    MATERIALS CHARACTERIZATION, 1997, 38 (4-5) : 273 - 286
  • [45] Modeling of grain refinement: Part III. Al-7Si-0.3Mg aluminum alloy
    Yao, X.
    McDonald, S. D.
    Dahle, A. K.
    Davidson, C. J.
    StJohn, D. H.
    JOURNAL OF MATERIALS RESEARCH, 2008, 23 (05) : 1301 - 1306
  • [46] The effect of Sn additions on the semi-solid microstructure of an Al-7Si-0.3Mg alloy
    Kliauga, AM
    Ferrante, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 67 - 72
  • [47] HEAT TREATMENT OF Al-7Si-0.3Mg ALLOY PREVIOUSLY INOCULATED WITH A NEW TYPE OF QUATERNARY MASTER ALLOY
    Moldovan, P.
    Popescu, Gabriela
    Butu, M.
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2007, 69 (02): : 91 - 98
  • [48] Heat treatment of Al-7Si-0.3Mg alloy previously inoculated with a new type of quaternary master alloy
    Moldovan, P.
    Popescu, Gabriela
    Buţu, M.
    UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 2007, 69 (02): : 91 - 98
  • [49] Tailoring Al-7Si-0.3Mg cast alloy properties to represent HPDC tensile and fatigue behaviour in component prototypes
    1600, Associazione Italiana di Metallurgia (108):
  • [50] The effect of Sr and Fe additions on the microstructure and mechanical properties of a direct squeeze cast Al-7Si-0.3Mg alloy
    J. X. Dong
    P. A. Karnezis
    G. Durrant
    B. Cantor
    Metallurgical and Materials Transactions A, 1999, 30 : 1341 - 1356
12345