The shear strength of calabrian pine (pinus brutia ten.) bonded with polyurethane and polyvinyl acetate adhesives

被引：0
|
作者：
Burdurlu, Erol [1 ]
Kiliç, Yilmaz [1 ]
Cankiz Elibol, G. [1 ]
Kiliç, Murat [1 ]
机构：
[1] Wood Products Industrial Engineering, School of Vocational Technology, Hacettepe University, 06532 Ankara, Turkey
来源：
Journal of Applied Polymer Science | 1600年 / 99卷 / 06期
关键词：
In this study; the change in shear strength on radial and tangential surfaces of Calabrian Pine (Pinus brutia Ten.) wood having different roughness values as the result of sawing with a circular ripsaw; planing and sanding; and bonded with polyurethane (PU) and polyvinyl acetate (PVAc) adhesives at the pressure levels of 3; 6; and; 9; kgf/; cm2; was studied. Each of the 360 specimens prepared to determine the effect of the variables on bond performance were subjected to shear test in an universal test machine in accordance with the ASTM D 905-98 standards. The values obtained were analyzed statistically and the results were interpreted. The highest shear strength (11.83 N/mm2) for plane of cut was obtained on the tangential surface after sanding and applying PVAc adhesive with a pressing pressure of 9 kgf/cm 2 . The lowest shear strength (6.01 N/mm2) was obtained in the joinings made on the planed surfaces by using PU adhesive and a pressing pressure of 3 kgf/cm2. The highest shear strength (9.10 N/mm2) on the radial surface was obtained after sanding and applying PVAc adhesive and pressing with a pressure of 6 kgf/cm2. The lowest shear strength (3.76 N/mm2) was obtained in the specimens whose surfaces were sanded and glued with PU adhesive with a pressing pressure of 3 kgf/cm 2. In general; in the radial surfaces; just like in the tangential surfaces; the specimens bonded with PVAc exhibited a higher shear strength compared with those glued with PU. According to these results; it is definitely necessary to sand the surfaces prior to the bonding process to have a higher shear strength. The bonding process should be made on the tangential surfaces with higher pressures. The PVAc adhesive should be preferred instead of the PU adhesive. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：3050 / 3061
相关论文
共 50 条
  • [21] The experimental particleboard manufacture from sunflower stalks (Helianthus annuus L.) and Calabrian pine (Pinus brutia Ten.)
    Guler, C
    Bektas, I
    Kalaycioglu, H
    FOREST PRODUCTS JOURNAL, 2006, 56 (04) : 56 - 60
  • [22] The experimental particleboard manufacture from sunflower stalks (Helianthus annuus L.) and Calabrian pine (Pinus brutia Ten.)
    Abant Izzet Baysal Univ., Faculty of Forestry, Wood Sci. and Technology, Dept. of Forest Industrial Engineering, Duzce, Turkey
    不详
    不详
    For Prod J, 2006, 4 (56-60):
  • [23] CROWN FUEL CHARACTERISTICS AND FUEL LOAD ESTIMATES IN YOUNG CALABRIAN PINE (Pinus brutia TEN.) STANDS IN NORTHWESTERN TURKEY
    Kucuk, Omer
    Bilgili, Ertugrul
    FRESENIUS ENVIRONMENTAL BULLETIN, 2008, 17 (12B): : 2226 - 2231
  • [24] Shear Bond Strength of Two-Layered Hardwood Strips Bonded with Polyvinyl Acetate and Polyurethane Adhesives
    Gasparik, Miroslav
    Gaff, Milan
    Ruman, Daniel
    Zaborsky, Vladimir
    Kasickova, Vaclava
    Sikora, Adam
    Sticha, Vaclav
    BIORESOURCES, 2017, 12 (01): : 495 - 513
  • [25] Fuel characterization and crown fuel load prediction in non-treated Calabrian pine (Pinus brutia Ten.) plantation areas
    Yurtgan, Mehmet
    Baysal, Ismail
    Kucuk, Omer
    IFOREST-BIOGEOSCIENCES AND FORESTRY, 2022, 15 : 458 - 464
  • [26] The harmful effects of air pollutants around the Yenikoy thermal power plant on architecture of Calabrian pine (Pinus brutia Ten.) needles
    Nuhoglu, Y
    JOURNAL OF ENVIRONMENTAL BIOLOGY, 2005, 26 (02): : 315 - 322
  • [27] THE EFFECT OF STORAGE TIME ON GERMINATION OF TURKISH PINE (Pinus brutia Ten.) SEEDS
    Cetin, Bilal
    SUMARSKI LIST, 2024, 148 (1-2): : 49 - 58
  • [28] Modeling post-fire mortality of Turkish pine (Pinus brutia Ten.)
    Guney, Coskun Okan
    Guney, Aylin
    Sari, Abdullah
    Kavgaci, Ali
    Ryan, Kevin C.
    Hood, Sharon M.
    FOREST ECOLOGY AND MANAGEMENT, 2024, 572
  • [29] RAINFALL INTERCEPTION BY PINE TREES (PINUS BRUTIA TEN.) IN MOSUL DAM REGION
    Shaymaa, T. A.
    Ibrahim, I. A.
    INTERNATIONAL JOURNAL OF AGRICULTURAL AND STATISTICAL SCIENCES, 2022, 18 : 1681 - 1685
  • [30] Estimation of Crown Fuel Load of Suppressed Trees in Non-treated Young Calabrian Pine (Pinus brutia Ten.) Plantation Areas
    Baysal, Ismail
    Yurtgan, Mehmet
    Kucuk, Omer
    Ozturk, Nuray
    KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, 2019, 19 (03): : 350 - 359
12345