Melting process and mechanics on laser sintering of single layer polyamide 6 powder

被引：0
|
作者：
机构：
[1] Zhou, Wenxiao
[2] Wang, Xiang
[3] Hu, Jiangbo
[4] Zhu, Xuelin
来源：
Wang, X. (wxyf@ustc.edu.cn) | 1600年 / Springer London卷 / 69期
关键词：
In this paper; polyamide 6 single layer laser sintering process was investigated. A moving volumetric heat source model that involves the energy function morphology was simulated; and the temperature field distribution of a single layer of polyamide 6 powder was investigated using the finite element method; with different scan space and preheating temperature. The sintering processes were conducted on several batch of single layer with original thickness of 0.5 mm; which consists of 80 mesh polyamide 6 powders. Then the percentage of porosity was calculated and tensile stress of was tested. The results indicate that the scanning space strongly affect the percentage of porosity. For example; the percentage of porosity reaches 45.1 % when the scanning space increases from 0.25 to 0.45 mm. The results also indicate that the preheating and holding temperature strongly affect the mechanical properties. For example; the max tensile test stress increased from 2.04 to 4.10 MPa when the temperature rises from 50 to 150 C; while the percentage of porosity shows very limited shift; reducing by only 9.54 %. © 2013 Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1 / 4
相关论文
共 50 条
  • [11] Evaluation of Powder Layer Density for the Selective Laser Melting (SLM) Process
    Choi, Joon-Phil
    Shin, Gi-Hun
    Lee, Hak-Sung
    Yang, Dong-Yeol
    Yang, Sangsun
    Lee, Chang-Woo
    Brochu, Mathieu
    Yu, Ji-Hun
    MATERIALS TRANSACTIONS, 2017, 58 (02) : 294 - 297
  • [12] Selective laser sintering of copper filled polyamide 12: Characterization of powder properties and process behavior
    Lanzl, Lydia
    Wudy, Katrin
    Greiner, Sandra
    Drummer, Dietmar
    POLYMER COMPOSITES, 2019, 40 (05) : 1801 - 1809
  • [13] Investigation on polyamide powder properties deterioration and efficient powder recycling in laser sintering
    Dotchev, K. D.
    Pham, D. T.
    Yusoff, W. A. Y.
    Soe, S.
    VIRTUAL AND RAPID MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2008, : 545 - +
  • [14] Molten pool behavior and its mechanism during selective laser melting of polyamide 6 powder: single track simulation and experiments
    Wu, Jinzhe
    Zheng, Jinjin
    Zhou, Hongjun
    Yang, Runhuai
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
  • [15] Thermal conductivity of polyamide 12 powder for use in laser sintering
    Yuan, Mengqi
    Diller, Timothy T.
    Bourell, David
    Beaman, Joseph
    RAPID PROTOTYPING JOURNAL, 2013, 19 (06) : 437 - 445
  • [16] Process Conditions of Forming the Surface Layer of Aluminum Powder Product by Layer-by-layer Laser Sintering
    Saprykina, N. A.
    Saprykin, A. A.
    Ibragimov, E. A.
    Arkhipova, D. A.
    INTERNATIONAL SEMINAR ON INTERDISCIPLINARY PROBLEMS IN ADDITIVE TECHNOLOGIES, 2016, 140
  • [17] Melting and solidifying behavior in single layer selective laser of pure tungsten powder
    Zhou X.
    Liu W.
    1600, Science Press (43):
  • [18] Measurement of actual powder layer height and packing density in a single layer in selective laser melting
    Wischeropp, Tim Marten
    Emmelmann, Claus
    Brandt, Milan
    Pateras, Aaron
    ADDITIVE MANUFACTURING, 2019, 28 : 176 - 183
  • [19] EFFECT OF PROCESS CONDITIONS ON TEMPERATURE DISTRIBUTION IN THE POWDER BED DURING LASER SINTERING OF POLYAMIDE-12
    Nelson, Jack A.
    Rennie, Allan E. W.
    Abram, Tom N.
    Bennett, Graham R.
    Adiele, Alex C.
    Tripp, Mathew
    Wood, Martyn
    Galloway, Greg
    JOURNAL OF THERMAL ENGINEERING, 2015, 1 (03): : 159 - 165
  • [20] Thermal Modeling of Polyamide 12 Powder in the Selective Laser Sintering Process Using the Discrete Element Method
    Lakraimi, Reda
    Abouchadi, Hamid
    Janan, Mourad Taha
    Chehri, Abdellah
    Saadane, Rachid
    MATERIALS, 2023, 16 (02)
12345