Tribological properties of oxidation modified carbon fibre-reinforced polyamide 6 composites

被引：0
|
作者：
Nie, W.Z. [1 ]
Li, J. [2 ]
Sheng, X.H. [3 ]
机构：
[1] School of Mechanical and Automation Engineering, Shanghai Institute of Technology, Shanghai 200235, China
[2] School of Mechanical and Electronic Engineering, Shanghai Second Polytechnic University, Shanghai 201209, China
[3] Shanghai Zhuzong Company, Shanghai 200032, China
来源：
Materials Science- Poland | 2010年 / 28卷 / 01期
关键词：
Interfaces (materials) - Tribology - Wear resistance - Adhesion - Ozone - Surface treatment - Reinforcement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile- based carbon fibre. The interfacial properties of carbon fibre-reinforced polyamide 6 (CF/PA6) composites were investigated by means of single fibre pull-out tests. It was found that the IFSS values of the composites with ozone treated carbon fibre are increased by 60% compared with that without treatment. The effect of surface treatment of carbon fibres on the tribological properties of CF/PA6 composites was also investigated for comparison. Experimental results revealed that surface treatment can effectively improve the interfacial adhesion between carbon fibre and PA6 matrix. Thus the wear resistance was significantly improved.
引用
收藏
页码：67 / 75
相关论文
共 50 条
  • [31] Recycled carbon fibre-reinforced polypropylene thermoplastic composites
    Akonda, M. H.
    Lawrence, C. A.
    Weager, B. M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (01) : 79 - 86
  • [32] Research Status of Carbon Fibre-reinforced PEEK Composites
    Liang, Qunqun
    Wu, Xiaoqing
    RESEARCH IN MATERIALS AND MANUFACTURING TECHNOLOGIES, PTS 1-3, 2014, 835-836 : 225 - +
  • [33] Effect of Expanded Graphite on Mechanical and Tribological Properties of Polyamide 6/Glass Fibre Composites
    Japic, Dajana
    Kulovec, Simon
    Kalin, Mitjan
    Slapnik, Janez
    Nardin, Blaz
    Ghalei, Behnam
    Huskic, Miroslav
    ADVANCES IN POLYMER TECHNOLOGY, 2022, 2022
  • [34] Analysis of mechanical properties anisotropy of nanomodified carbon fibre-reinforced woven composites
    Ruslantsev, A. N.
    Portnova, Ya M.
    Tairova, L. P.
    Dumansky, A. M.
    4TH INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITES AND MATERIALS TECHNOLOGIES FOR ARDUOUS APPLICATIONS (ACMTAA), 2016, 153
  • [35] The Microstructure and Tribological Properties of Carbon Fibre Reinforced Carbon/SiC Dual Matrix Composites
    Xiao Peng
    Li Zhuan
    Xiong Xiang
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 95 - 98
  • [36] Toughened carbon fibre-reinforced polymer composites with nanoparticle-modified epoxy matrices
    D. Carolan
    A. Ivankovic
    A. J. Kinloch
    S. Sprenger
    A. C. Taylor
    Journal of Materials Science, 2017, 52 : 1767 - 1788
  • [37] Manufacture and properties of carbon fibre-reinforced C/SiC dual matrix composites
    Li Zhuan
    Xiao Peng
    Xiong Xiang
    Huang Bo-Yun
    NEW CARBON MATERIALS, 2010, 25 (03) : 225 - 231
  • [38] Thermomechanical and damage characterisation of short glass fibre reinforced polyamide 6 and impact-modified polyamide 6 composites
    Song, Peihao
    Trivedi, Akash R.
    Chapman, David J.
    Graham, Aaron
    Hawkins, Nicholas
    Lukic, Bratislav
    Rack, Alexander
    Siviour, Clive R.
    COMPOSITES PART B-ENGINEERING, 2024, 287
  • [39] Toughened carbon fibre-reinforced polymer composites with nanoparticle-modified epoxy matrices
    Carolan, D.
    Ivankovic, A.
    Kinloch, A. J.
    Sprenger, S.
    Taylor, A. C.
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (03) : 1767 - 1788
  • [40] Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering
    Jansson, Anton
    Pejryd, Lars
    ADDITIVE MANUFACTURING, 2016, 9 : 7 - 13
12345