Tribological properties of oxidation modified carbon fibre-reinforced polyamide 6 composites

被引：0
|
作者：
Nie, W.Z. [1 ]
Li, J. [2 ]
Sheng, X.H. [3 ]
机构：
[1] School of Mechanical and Automation Engineering, Shanghai Institute of Technology, Shanghai 200235, China
[2] School of Mechanical and Electronic Engineering, Shanghai Second Polytechnic University, Shanghai 201209, China
[3] Shanghai Zhuzong Company, Shanghai 200032, China
来源：
Materials Science- Poland | 2010年 / 28卷 / 01期
关键词：
Interfaces (materials) - Tribology - Wear resistance - Adhesion - Ozone - Surface treatment - Reinforcement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile- based carbon fibre. The interfacial properties of carbon fibre-reinforced polyamide 6 (CF/PA6) composites were investigated by means of single fibre pull-out tests. It was found that the IFSS values of the composites with ozone treated carbon fibre are increased by 60% compared with that without treatment. The effect of surface treatment of carbon fibres on the tribological properties of CF/PA6 composites was also investigated for comparison. Experimental results revealed that surface treatment can effectively improve the interfacial adhesion between carbon fibre and PA6 matrix. Thus the wear resistance was significantly improved.
引用
收藏
页码：67 / 75
相关论文
共 50 条
  • [1] Tribological properties of oxidation modified carbon fibre-reinforced polyamide 6 composites
    Nie, W. Z.
    Li, J.
    Sheng, X. H.
    MATERIALS SCIENCE-POLAND, 2010, 28 (01): : 67 - 75
  • [2] Tribological behaviour of unidirectional carbon fibre-reinforced epoxy composites
    Sahin, Y.
    De Baets, P.
    13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16), 2017, 174
  • [3] Elastic Properties of Carbon Fibre-Reinforced Epoxy Composites
    Rahmani, Hossein
    Najafi, S. Heydar Mahmoudi
    Ashori, Alireza
    Golriz, Mandi
    POLYMERS & POLYMER COMPOSITES, 2015, 23 (07): : 475 - 481
  • [4] Preparation and properties of modified carbon fiber reinforced polyamide 6 composites
    Liu Xu
    Xu Hai
    Xu Li-xin
    Zhang Hong
    Zhou Qiong
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2021, 49 (04): : 128 - 134
  • [5] Polyamide 12 modified with nanoparticles: Effect on impact behaviour and on the electrical conductivity of carbon fibre-reinforced epoxy composites
    Arnold, Marcus
    Henne, Markus
    Bender, Klaus
    Drechsler, Klaus
    JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (02) : 159 - 171
  • [6] The effect of the addition of graphite on tribological properties of glass fibre-reinforced polyimide composites
    Li, J.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J3) : 279 - 284
  • [7] Development of flame retardant coatings containing hexaphenoxycyclotriphosphazene and expandable graphite for carbon fibre-reinforced polyamide 6 composites
    Kovács, Zsófia
    Toldy, Andrea
    Polymer Degradation and Stability, 230
  • [8] Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites
    Ari, Ali
    Bayram, Ali
    Karahan, Mehmet
    Karagoz, Secgin
    INDUSTRIA TEXTILA, 2023, 74 (02): : 175 - 183
  • [9] Thermo-compression forming of flax fibre-reinforced polyamide 6 composites: influence of the fibre thermal degradation on mechanical properties
    Liang, Shaoxiong
    Nouri, Hedi
    Lafranche, Eric
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (23) : 7660 - 7672
  • [10] Thermo-compression forming of flax fibre-reinforced polyamide 6 composites: influence of the fibre thermal degradation on mechanical properties
    Shaoxiong Liang
    Hedi Nouri
    Eric Lafranche
    Journal of Materials Science, 2015, 50 : 7660 - 7672
12345