In-situ synthesis mechanism of nano-layered ternary Ta2AlC

被引:0
|
作者
Tian, Bao-Na [1 ]
Ying, Guo-Bing [1 ]
Wang, Peng-Ju [1 ]
Wang, Cheng [1 ]
Wu, Yu-Ping [1 ]
机构
[1] College of Mechanics and Materials, Hohai University, Nanjing, China
关键词
Binary alloys - Intermetallics - Aluminum alloys - Preheating - Aluminum - Phase composition - Tantalum;
D O I
暂无
中图分类号
学科分类号
摘要
Ta2AlC ceramics were synthesized by self-propagating high-temperature/in-situ reaction method. Effect of preheating temperature and Al content on the phase composition and microstructure of the as-synthesized Ta2AlC was investigated. The phase composition and microstructure of the samples were determined by XRD and SEM, respectively. The synthesis mechanism was concluded by DSC, combining with the reaction products, probable middle-products and system heat absorption. The results indicate that preheating temperature at 250 is propitious to the synthesis of high-purity Ta2AlC. Proper excessive Al can result in the element diffusion for the synthesis of high-purity Ta2AlC. When Ta2AlC is synthesized by SHS, Al melts into liquid first, and then Ta reacts with C to release a large amount of heat and Ta reacts with Al to generate Ta-Al intermetallic triggered by the exothermal reaction between Ta and C. Ta2AlC is mainly synthesized by the reaction of Ta2C and Al together with possible reaction of TaC with Ta-Al intermetallic. ©, 2015, Chinese Ceramic Society. All right reserved.
引用
收藏
页码:1773 / 1777
相关论文
共 50 条
  • [31] A review of novel ternary nano-layered MAX phases reinforced AZ91D magnesium composite
    Wantong Chen
    Wenbo Yu
    Chaosheng Ma
    Guozheng Ma
    Laiqi Zhang
    Haidou Wang
    Journal of Magnesium and Alloys, 2022, 10 (06) : 1457 - 1475
  • [32] Enhanced wear resistance and strength synergy in Ti3AlC2 MAX through in-situ synthesis of nano TiB2 heterostructure
    Li, Dongting
    Liu, Chang
    Liu, Ying
    Zhou, Liyu
    Wang, Kaiqiang
    Wang, Lu
    Wang, Renquan
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 125
  • [33] One developed finite element model used in nano-layered flaky Ti2AlC MAX ceramic particles reinforced magnesium composite
    Wantong Chen
    Jingyu Yang
    Wenbo Yu
    Yishi Su
    Ang Zhang
    Chaosheng Ma
    Yihu Ma
    Journal of Magnesium and Alloys, 2024, 12 (10) : 4219 - 4228
  • [34] One developed finite element model used in nano-layered flaky Ti2AlC MAX ceramic particles reinforced magnesium composite
    Chen W.
    Yang J.
    Yu W.
    Su Y.
    Zhang A.
    Ma C.
    Ma Y.
    Journal of Magnesium and Alloys, 2024, 12 (10): : 4219 - 4228
  • [35] Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites
    Filimonov, D.
    Gupta, S.
    Palanisamy, T.
    Barsoum, M. W.
    TRIBOLOGY LETTERS, 2009, 33 (01) : 9 - 20
  • [36] In-situ Hot Pressing Synthesis and Corrosion Properties of High Pure Cr2AlC
    Song Jing-Hong
    Mei Bing-Chu
    Wang Jing-Ping
    JOURNAL OF INORGANIC MATERIALS, 2010, 25 (04) : 419 - 423
  • [37] Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites
    D. Filimonov
    S. Gupta
    T. Palanisamy
    M. W. Barsoum
    Tribology Letters, 2009, 33 : 9 - 20
  • [38] Synthesis and mechanism of ternary carbide Ti3AlC2 by in situ hot pressing process in TiC-Ti-Al system
    Ai, T.
    Wang, F.
    Zhang, Y.
    Jiang, P.
    Yuan, X.
    ADVANCES IN APPLIED CERAMICS, 2013, 112 (07) : 424 - 429
  • [39] Synthesis and Mechanical Properties of Ta2AlC-Ta4AlC3 Composites by Spark Plasma Sintering
    Ma F.
    Ying G.
    Su L.
    Zhang C.
    Luo H.
    Dai Z.
    Wang X.
    Wang C.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2019, 47 (01): : 104 - 108
  • [40] Atomic scale characterization of layered ternary Cr2AlC ceramic
    Lin, ZJ
    Zhuo, MJ
    Zhou, YC
    Li, MS
    Wang, JY
    JOURNAL OF APPLIED PHYSICS, 2006, 99 (07)