Prediction of depth removal in leather surface grit blasting using neural networks and Box-Behnken design of experiments

被引：0

作者：

Hu, Zhongxu ^{[1
]}

Bicker, Robert ^{[1
]}

Marshall, Chris ^{[1
]}

机构：

[1] Department of Mechanical and System Engineering, Newcastle University Upon Tyne, Dummy, NE1 7RU, United Kingdom

来源：

International Journal of Advanced Manufacturing Technology | 2007年 / 32卷 / 7-8期

关键词：

In this work; leather material is for the first time prepared by grit blasting process in order to improve peel strength when bonding. Peel tests show that it is the surface depth of removal rather than surface roughness that dominates the bonding performance. Therefore; measurement of surface removal is critical for surface preparation of using a grit blasting process. Indirect measurement of preparation performance is essential due to the hazardous conditions for conventional sensing equipment in the blasting chamber. A neural network modelling approach is proposed for the prediction of surface removal of leather materials; and the neural network model also characterizes the process; which is very useful for machine design and optimum control. The data used for the training of the artificial neural network is collected through screening experiments; which was efficiently planned using the Box-Behnken design method. © Springer-Verlag London Limited 2007;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：732 / 738

共 50 条

[31] Optimization of Fiber-Water Dispersion Process Using Box-Behnken Design of Experiments Coupled with Response Surface Methodology of Analysis
Das, Dipayan
Butola, B. S.
Renuka, S.
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, 2012, 33 (08) : 1116 - 1120
[32] Tablet Compression Optimization of Pravastatin Tablets Using Response Surface Methodology with the Box-Behnken Design
Kim, Kang Min
LATIN AMERICAN JOURNAL OF PHARMACY, 2019, 38 (11): : 2177 - 2184
[33] Box-Behnken response surface methodology design for amaranth dye degradation using gold nanoparticles
Nachiyar, G. K. Vanathi
Surendra, T. V.
Kalaiselvi, V.
Rajagopal, Rajakrishnan
Kuppusamy, Palaniselvam
Basavegowda, Nagaraj
Roopan, Selvaraj Mohana
OPTIK, 2022, 267
[34] Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box-Behnken Design
Fnides, Mohamed
Amroune, Salah
Slamani, Mohamed
Elhadi, Abdelmalek
Arslane, Mustapha
Jawaid, Mohammad
JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, 2025, 13 (01)
[35] Optimizing the parameters of amoxicillin removal in a photocatalysis/ozonation process using Box-Behnken response surface methodology
Norabadi, Elham
Panahi, Ayat Hossein
Ghanbari, Reza
Meshkinian, Ali
Kamani, Hossein
Ashrafi, Seyed Davoud
DESALINATION AND WATER TREATMENT, 2020, 192 : 234 - 240
[36] Box-Behnken Design Approach for Optimizing Removal of Copper from Wastewater Using a Novel and Green Adsorbent
Ince, Muharrem
Ince, Olcay Kaplan
ATOMIC SPECTROSCOPY, 2017, 38 (06) : 200 - 207
[37] OPTIMIZATION OF USED EDIBLE OIL TRANSESTERIFICATION USING RESPONSE SURFACE METHODOLOGY AND BOX-BEHNKEN DESIGN
Chhabra, Mayank
Vashishth, Aditya
Macedo, Victor Daniel Jimenez
Gaur, Anjula
Kesharvani, Sujeet
Dwivedi, Gaurav
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, 2024, 23 (12):
[38] Application of Box-Behnken design to optimize the phosphorus removal from industrial wastewaters using magnetic nanoparticles
Celso E. D. Cardoso
Joana C. Almeida
João Rocha
Eduarda Pereira
Environmental Science and Pollution Research, 2025, 32 (11) : 6804 - 6816
[39] Evaluation of wet air oxidation variables for removal of organophosphorus pesticide malathion using Box-Behnken design
Isgoren, Melike
Gengec, Erhan
Veli, Sevil
WATER SCIENCE AND TECHNOLOGY, 2017, 75 (03) : 619 - 628
[40] OPTIMIZATION OF Pb(II) REMOVAL FROM AQUEOUS SOLUTIONS BY FLY ASH USING BOX-BEHNKEN DESIGN
Maiti, Soumitra
Prasad, Basheshwer
Minocha, Ashwani Kumar
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, 2022, 21 (01): : 125 - 135

← 1 2 3 4 5 →