Grain refiner fabricated by spark plasma sintering for hypoeutectic Al-Si alloy cast and its refining ability

被引:0
|
作者
Sato, Hisashi [1 ]
Nakamura, Fumiya [1 ]
Watanabe, Yoshimi [1 ]
机构
[1] Nagoya Inst Technol, Grad Sch Engn, Gokiso Cho,Showa Ku, Nagoya 4668555, Japan
基金
日本科学技术振兴机构;
关键词
grain refinement; spark plasma sintering; casting; Al-Si alloy; EUTECTIC SI; PURE AL; NUCLEATION; MICROSTRUCTURE; PARTICLES; MECHANISM; BEHAVIOR; SILICON; GROWTH;
D O I
10.35848/1347-4065/ad8acd
中图分类号
O59 [应用物理学];
学科分类号
摘要
Grain refiner fabricated by spark plasma sintering (SPS) for an as-cast hypoeutectic Al-Si alloy were proposed. The proposed grain refiner contains Al3Ti and Na flux particles in an Al-11 mass%Si alloy matrix. Through SPS, the grain refiner were obtained without any reaction between the Al3Ti particles, Na flux particles, and Al-11 mass%Si alloy matrix. Casting tests were conducted using the proposed grain refiners, and the refiners reduced the dendrite cell size and the dendrite arm spacing of the primary alpha-Al phase, as well as the lamellar spacing of the eutectic structure. The eutectic Si phase changed to a granular shape upon the refinement of the eutectic structure. Furthermore, the tensile strength and ductility of the as-cast Al-11 mass%Si alloy were drastically improved by adding the proposed grain refiner. This improvement was attributed to the refinement and granulation of the eutectic Si phase.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] Grain refinement of hypoeutectic Al-Si alloy prepared with ELTA by Al-4B master alloy
    Wang Ming-xing
    Meng Xiang-yong
    Liu Zhi-yong
    Liu Zhong-xia
    Weng Yong-gang
    Song Tian-fu
    Yang Sheng
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1342 - S1345
  • [22] Influence of spark plasma sintering and conventional sintering on microstructure and mechanical properties of hypereutectic Al-Si alloy and hypereutectic Al-Si/B4C composites
    Ozer, Melika
    Aydogan, Seher Irem
    Ozer, Alpay
    Cinici, Hanifi
    Ayas, Erhan
    KOVOVE MATERIALY-METALLIC MATERIALS, 2022, 60 (03): : 171 - 179
  • [23] Decomposition of Al2.7Fe0.3Ti in heated Al-Al2.7Fe0.3Ti refiner fabricated by spark plasma sintering and its refining performance
    Watanabe, Yoshimi
    Hamada, Takayuki
    Sato, Hisashi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2017, 56 (01)
  • [24] Effects of microstructure on mechanical properties of hyper eutectic Al-Si alloy produced by spark plasma sintering
    Yasuno, Takuya
    Naruse, Tetsuya
    Kohno, Tohru
    Kawahara, Masakazu
    Tokita, Masao
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2009, 56 (12): : 758 - 762
  • [25] Effect of silicon content in grain refining hypoeutectic Al-Si foundry alloys with boron and titanium additions
    Birol, Y.
    MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (04) : 385 - 389
  • [26] Development of Al-Nb-B master alloy with high Nb/B ratio for grain refinement of hypoeutectic Al-Si cast alloys
    Xu, J.
    Li, Y.
    Hu, B.
    Jiang, Y.
    Li, Q.
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (23) : 14561 - 14576
  • [27] The effect of reinforced SiC on the mechanical properties of the fabricated hypoeutectic Al-Si alloy by centrifugal casting
    Ali, Saad Mahmood
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2019, 22 (04): : 1125 - 1135
  • [28] Fabrication of controlled expansion Al-Si composites by pressureless and spark plasma sintering
    Haque, Asraful
    Shekhar, S.
    Murty, S. V. S. Narayana
    Ramkumar, J.
    Kar, K.
    Mondal, K.
    ADVANCED POWDER TECHNOLOGY, 2018, 29 (12) : 3427 - 3439
  • [29] Hall-Petch equation in a hypoeutectic Al-Si cast alloy: grain size vs. secondary dendrite arm spacing
    Ghassemali, Ehsan
    Riestra, Martin
    Bogdanoff, Toni
    Kumar, Bharath S.
    Seifeddine, Salem
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 19 - 24
  • [30] Grain refining in spark plasma sintering Al2O3 ceramics
    Liu, Jinling
    Wang, Yiguang
    Yang, Fuqian
    Chen, Kepi
    An, Linan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 622 : 596 - 600