Preparation and properties of core [poly(styrene-n-butyl acrylate)]-shell [poly(styrene-methyl methacrylate-vinyl triethoxide silane)] structured latex particles with self-crosslinking characteristics

被引：0
|
作者：
Guo, Tianying [1 ]
Chen, Xi [1 ]
Song, Moudao [1 ]
Zhang, Banghua [1 ]
机构：
[1] Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, Nankai University, Tianjin 300071, China
来源：
Journal of Applied Polymer Science | 2006年 / 100卷 / 03期
关键词：
Structured latex particles with a slightly crosslinked poly(styrene-n-butyl acrylate) (PSB) core and a poly(styrene-methacrylate-vinyl triethoxide silane) (PSMV) shell were prepared by seed emulsion polymerization; and the latex particle structures were investigated with Fourier transform infrared; thermogravimetric analysis; differential scanning calorimetry; transmission electron microscopy; and dynamic light scattering. The films that were formed from the structured core (PSB)-shell (PSMV) particles under ambient conditions had good water repellency and good tensile strength in comparison with films from structured core (PSB)-shell [poly(styrene-methyl methyacrylate)] latex particles; this was attributed to the self-crosslinking of CH 2=CH-Si(OCH2CH3)3 in the outer shell structure. The relationship between the particle structure and the film properties was also investigated in this work. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1824 / 1830
相关论文
共 43 条
  • [21] Preparation of core–shell latex particles by emulsion co-polymerization of styrene and butyl acrylate, and evaluation of their pigment properties in emulsion paints
    Lakhya J. Borthakur
    Tirthankar Jana
    S. K. Dolui
    Journal of Coatings Technology and Research, 2010, 7 : 765 - 772
  • [22] PREPARATION OF MOLECULAR-WEIGHT DISTRIBUTION BLENDS OF POLY(STYRENE-N-BUTYL METHACRYLATE) CO-POLYMERS AND THE EFFECT ON MECHANICAL-PROPERTIES
    WEAVER, JL
    BEATTY, CL
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1980, 180 (AUG): : 57 - POLY
  • [23] Poly(n-butyl acrylate)/Poly(vinyl acetate-co-methyl methacrylate) Structural Rubber Latex Particles as Impact Modifier for Unsaturated Polyester Resin: Preparation and Characterization
    Moghbeli, Mohammad Reza
    Bakhshandeh, Faezeh
    Ahmadi, Morteza
    IRANIAN POLYMER JOURNAL, 2011, 20 (07) : 607 - 617
  • [24] Poly(n-butyl acrylate)/poly(vinyl acetate-co-methyl methacrylate) structural rubber latex particles as impact modifier for unsaturated polyester resin: Preparation and characterization
    Moghbeli, Mohammad Reza
    Bakhshandeh, Faezeh
    Ahmadi, Morteza
    Iranian Polymer Journal (English Edition), 2011, 20 (07): : 607 - 617
  • [25] Preparation of core-shell coagulates by hydrophobic heterocoagulation of micron-sized poly(methyl methacrylate) and submicron-sized poly(styrene) particles
    Taniguchi, Tatsuo
    Ogawa, Tatsuya
    Kamata, Yoshitada
    Kobaru, Shotaro
    Takeuchi, Naoki
    Kohri, Michinari
    Nakahira, Takayuki
    Wakiya, Takeshi
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2010, 356 (1-3) : 169 - 175
  • [26] Nanocomposite particles with core-shell morphology III: preparation and characterization of nano Al2O3-poly(styrene-methyl methacrylate) particles via miniemulsion polymerization
    Mahdavian, Ali Reza
    Sarrafi, Yaghoub
    Shabankareh, Mehdi
    POLYMER BULLETIN, 2009, 63 (03) : 329 - 340
  • [27] Preparation of core-shell latex particles by emulsion co-polymerization of styrene and butyl acrylate, and evaluation of their pigment properties in emulsion paints
    Borthakur, Lakhya J.
    Jana, Tirthankar
    Dolui, S. K.
    JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2010, 7 (06) : 765 - 772
  • [28] Toughening Cyanate Ester Resin by Using Poly(n-butyl acrylate)@Polymethyl Methacrylate Core-Shell Structured Polymer Particles
    Zhai L.
    Ji H.
    Yao Y.
    Qu X.
    Cailiao Daobao/Materials Reports, 2019, 33 (02): : 705 - 708
  • [29] Effects of core-shell particle growth manners on morphologies and properties of poly(vinyl chloride)/(methyl methacrylate-butadiene-styrene) blends
    Zhou, Chao
    Wu, Shuting
    Liu, Hua
    Wu, Guangfeng
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2016, 22 (01): : 37 - 42
  • [30] In situ preparation and properties of high-solid-content and low-viscosity poly(methyl methacrylate/n-butyl acrylate/acrylic acid)/poly(styrene/acrylic acid) composite latexes
    Ai, Zhao-Quan
    Zhou, Qi-Long
    Xie, Chang-Sheng
    Zhang, Hong-Tao
    Journal of Applied Polymer Science, 1600, 103 (03): : 1815 - 1825
12345