Effects of punch load for elliptical deep drawing product of automotive parts

被引：0
|
作者：
School of Mechanical, Manufacturing and Medical Engineering, Queensland University of Technology, Gardens Point Campus, 2 George Street, Brisbane, QLD 4001, Australia [1 ]
机构：
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 35卷 / 7-8期
关键词：
Deep drawing process; one of sheet metal forming methods; is very useful in industrial field because of its efficiency. The production of optimal products using this process is dependent on the process variables such as blank shapes; profile radii of punch and die; and formability of materials. Of the variables; the blank shape is very important since it controls the formability factor. This paper reports the investigations on three kinds of blank shapes and the scribed circle test on three deformation modes. The punch load distribution for elliptical forming processes were measured under different conditions of profile radii of punch and die and discussed here. These experiments clarified the influence of the profile radii of the punch and die and the blank shape on the punch-load distribution for the elliptical deep drawing product of automobile parts. The aim of this study is to investigate the effect that the process variables have on drawability in a non-axisymmetric elliptical deep-drawing process and to obtain useful data from the industrial field. © 2006 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：814 / 820
相关论文
共 50 条
  • [1] Effects of punch load for elliptical deep drawing product of automotive parts
    Dong Hwan Park
    Prasad K. D. V. Yarlagadda
    The International Journal of Advanced Manufacturing Technology, 2008, 35 : 814 - 820
  • [2] Effects of punch load for elliptical deep drawing product of automotive parts
    Park, Dong Hwan
    Yarlagadda, Prasad K. D. V.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 35 (7-8): : 814 - 820
  • [3] Effects of Mismatch Parameters on the Punch Load During Deep Drawing
    Wu, Jie
    Ma, Zeng-Sheng
    Zhou, Yi-Chun
    Lu, Chun-Sheng
    MATERIALS FOCUS, 2013, 2 (04) : 272 - 276
  • [4] Study on punch load of non-axisymmetric deep drawing product according to blank shape
    Park, DH
    Huh, YM
    Kang, SS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 89 - 94
  • [5] HYDROMECHANICAL DRAWING OF AUTOMOTIVE PARTS
    NAKAMURA, S
    SUGIURA, H
    ONOE, H
    IKEMOTO, K
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 46 (3-4) : 491 - 503
  • [6] Influence of Die and Punch Profile Radii on Deep Drawing Force and Punch Load- Displacement Diagram
    Mansourinejad, M.
    Mirzakhani, B.
    Pishbin, H.
    Amadeh, A.
    Farshchian, B.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 389 - +
  • [7] Deep drawing the elliptical cups
    Hasanbegovic, S.
    Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON RECONSTRUCTION AND DEVELOPMENT, 2003, : 181 - 182
  • [8] Effect of punch profile on thickness distribution in hydromechanical deep drawing of conical-cylindrical parts
    Mashhadi, M.
    Hashemi, A.
    Bakhshi-Jooybari, M.
    Gorji, A.
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 143 - 148
  • [9] The Manufacture of Cylindrical Parts by Drawing Using a Telescopic Punch
    Arhat, Roman
    Puzyr, Ruslan
    Shchetynin, Viktor
    Moroz, Mykola
    ADVANCED MANUFACTURING PROCESSES II, 2021, : 363 - 372
  • [10] Experimental Study of Drawing Load Curves in Forming Conical Parts by Hydroforming and Conventional Deep Drawing Processes
    Norouzi, Selman
    Yaghoubi, Amir Reza
    Bakhshi-Jooybari, Mohammad
    Gorji, Abdolhamid
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 556 - 560
12345