Rapid synthesis and elastic properties of fine-grained Ti2SnC produced by spark plasma sintering

被引：0
|
作者：
Lapauw, T. [1 ,2 ]
Vanmeensel, K. [1 ]
Lambrinou, K. [2 ]
Vleugels, J. [1 ]
机构：
[1] KU Leuven, Department of Materials Engineering, Kasteelpark Arenberg 44, Leuven,B-3001, Belgium
[2] SCK CEN, Boeretang 200, Mol,B-2400, Belgium
来源：
Journal of Alloys and Compounds | 2015年 / 631卷
关键词：
Elastic moduli - Spark plasma sintering - Binary alloys - Elasticity - Processing - Tin;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Fine-grained Ti2SnC was successfully synthesized and densified by spark plasma sintering (SPS) of pure Ti, Sn and C powders at 1200-1400 °C. Ti2SnC was the predominant phase at 1325 °C, with minor amounts of remaining Sn and TiCx. At lower processing temperatures, Ti-Sn intermetallics and TiCx were present, whereas the decomposition of the MAX phase into Sn and TiCx was observed at higher temperatures. The shear modulus, Young's modulus and Poisson's ratio were measured to be 83.9 GPa, 207.4 GPa and 0.24, respectively. The evolution of the Young's modulus as a function of temperature was measured up to 800 °C. © 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：72 / 76
相关论文
共 50 条
  • [21] Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering
    Luan, WL
    Gao, L
    Kawaoka, H
    Sekino, T
    Niihara, K
    CERAMICS INTERNATIONAL, 2004, 30 (03) : 405 - 410
  • [22] Ultrafast Atomic Diffusion Paths in Fine-Grained Nickel Obtained by Spark Plasma Sintering
    de la Cruz, Lucia Garcia
    Domenges, Bernadette
    Divinski, Sergiy V.
    Wilde, Gerhard
    Hug, Eric
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (07): : 3425 - 3434
  • [23] Fine-Grained TiAl Alloy Prepared by Double Mechanical Milling and Spark Plasma Sintering
    Xiao Shulong
    Tian Jing
    Xu Lijuan
    Chen Yuyong
    Yu Hongbao
    Han Jiecai
    Zhang Deliang
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (05) : 880 - 884
  • [24] Preparation of Fine-Grained 10ScSZ bulks by Spark Plasma Sintering and Investigation of Sintering Temperature
    Zhao Xiaohui
    Yao Lei
    Li Tianjun
    Zhang Mengfei
    Pan Wei
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (02) : 500 - 504
  • [25] Preparation of Fine-Grained 10ScSZ bulks by Spark Plasma Sintering and Investigation of Sintering Temperature
    Zhao, Xiaohui
    Yao, Lei
    Li, Tianjun
    Zhang, Mengfei
    Pan, Wei
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2020, 49 (02): : 500 - 504
  • [26] Ultrafast Atomic Diffusion Paths in Fine-Grained Nickel Obtained by Spark Plasma Sintering
    Lucía García de la Cruz
    Bernadette Domenges
    Sergiy V. Divinski
    Gerhard Wilde
    Eric Hug
    Metallurgical and Materials Transactions A, 2020, 51 : 3425 - 3434
  • [27] Constitutive Modeling of a Fine-Grained Ti2AlNb-Based Alloy Fabricated by Mechanical Alloying and Subsequent Spark Plasma Sintering
    Sim, Kyong-Ho
    Li, Yun Chol
    Li, Chun-Ho
    Kim, Myong-Ok
    Kim, Hyok-Chol
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (03)
  • [28] Rapid synthesis of Ti2AlC by spark plasma sintering technique
    Zhou, WB
    Mei, BC
    Zhu, JQ
    Hong, XL
    MATERIALS LETTERS, 2005, 59 (01) : 131 - 134
  • [29] Synthesis of Ti2SnC at low-temperature using mechanically activated sintering process
    Li, Shi-Bo
    Bei, Guo-Ping
    Zhai, Hong-Xiang
    Zhou, Yang
    Li, Cui-Wei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 457 (1-2): : 282 - 286
  • [30] Densification and mechanical properties of fine-grained Al2O3-ZrO2 composites consolidated by spark plasma sintering
    Meng, Fancheng
    Liu, Cheng
    Zhang, Fan
    Tian, Zhongqing
    Huang, Weijiu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 512 (01) : 63 - 67
12345