Rapid synthesis and elastic properties of fine-grained Ti2SnC produced by spark plasma sintering

被引：0

作者：

Lapauw, T. ^{[1
,2
]}

Vanmeensel, K. ^{[1
]}

Lambrinou, K. ^{[2
]}

Vleugels, J. ^{[1
]}

机构：

[1] KU Leuven, Department of Materials Engineering, Kasteelpark Arenberg 44, Leuven,B-3001, Belgium

[2] SCK CEN, Boeretang 200, Mol,B-2400, Belgium

来源：

Journal of Alloys and Compounds | 2015年 / 631卷

关键词：

Elastic moduli - Spark plasma sintering - Binary alloys - Elasticity - Processing - Tin;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Fine-grained Ti2SnC was successfully synthesized and densified by spark plasma sintering (SPS) of pure Ti, Sn and C powders at 1200-1400 °C. Ti2SnC was the predominant phase at 1325 °C, with minor amounts of remaining Sn and TiCx. At lower processing temperatures, Ti-Sn intermetallics and TiCx were present, whereas the decomposition of the MAX phase into Sn and TiCx was observed at higher temperatures. The shear modulus, Young's modulus and Poisson's ratio were measured to be 83.9 GPa, 207.4 GPa and 0.24, respectively. The evolution of the Young's modulus as a function of temperature was measured up to 800 °C. © 2015 Elsevier Ltd. All rights reserved.

引用

页码：72 / 76

共 50 条

[1] Rapid synthesis and elastic properties of fine-grained Ti2SnC produced by spark plasma sintering
Lapauw, T.
Vanmeensel, K.
Lambrinou, K.
Vleugels, J.
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 631 : 72 - 76
[2] Preparation of Ti2SnC electric ceramics by mechanical alloying and spark plasma sintering
Key Laboratory of Advanced Structrural Materials Ministry of Education, Changchun University of Technology, Changchun 130012, China
不详
不详
Rengong Jingti Xuebao, 2009, SUPPL. 1 (68-71):
[3] Synthesis of Ti2SnC under Optimized Experimental Parameters of Pressureless Spark Plasma Sintering Assisted by Al Addition
Lu, Chen
Wang, Yue
Wang, Xiaofan
Zhang, Jianfeng
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
[4] Processing of fine-grained aluminum foam by spark plasma sintering
Wen, CE
Mabuchi, M
Yamada, Y
Shimojima, K
Chino, Y
Hosokawa, H
Asahina, T
JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (20) : 1407 - 1409
[5] Friction and wear behavior of copper/graphite/Ti2SnC composites fabricated by spark plasma sintering (SPS)
Wei, Hongming
Zou, Jianpeng
Gong, Yurong
Li, Xiaoya
Zhan, Wenyi
Li, Feiyang
WEAR, 2023, 512
[6] Manufacturing of fine-grained titanium by cryogenic milling and spark plasma sintering
Kozlik, Jiri
Becker, Hanka
Strasky, Josef
Harcuba, Petr
Janecek, Milos
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 772
[7] Fine-grained AlN ceramics from nanopowder by spark plasma sintering
Nishimura, Toshiyuki
Sekine, Keisuke
Yamamoto, Yoshinobu
Hirosaki, Naoto
Ishigaki, Takamasa
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2010, 118 (1383) : 1050 - 1052
[8] Dense and fine-grained barium titanate prepared by spark plasma sintering
Jamil, M. S.
Saputro, K. E.
Noviyanto, A.
Widayatno, W. B.
Wismogroho, A. S.
Amal, M., I
Rochman, N. T.
Nishimura, T.
INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS, 2018, 2019, 1191
[9] Spark Plasma Sintering of Fine-Grained WC-Co Composites
Wachowicz, Joanna
Dembiczak, Tomasz
Fik, Joanna
Balaga, Zbigniew
Kruzel, Robert
Naprstkova, Natasa
Kusmierczak, Sylvia
MATERIALS, 2023, 16 (24)
[10] Thermoelectric Properties of Fine-Grained PbTe Bulk Materials Fabricated by Cryomilling and Spark Plasma Sintering
Kuo, Chia-Hung
Chien, Hsiu-Shan
Hwang, Chii-Shyang
Chou, Ya-Wen
Jeng, Ming-Shan
Yoshimura, Masahiro
MATERIALS TRANSACTIONS, 2011, 52 (04) : 795 - 801

← 1 2 3 4 5 →