Analysis and experiment on the vertical vibration characteristics of a disc cutter

被引：0

作者：

Li, Jie ^{[1
]}

Huang, Yuanjun ^{[1
]}

Zhang, Bin ^{[1
]}

Ma, Chao ^{[1
]}

机构：

[1] College of Mechanical Engineering, Shijiazhuang Railway University, Shijiazhuang,050043, China

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2020年 / 39卷 / 09期

关键词：

The vertical vibration of a disc cutter has certain influence on the penetration and rock breaking efficiency of a full-face tunnel boring machine. In order to study the factors affecting the vertical vibration of cutter; a three-degree-of-freedom vertical vibration model for the disc cutter was established; and the equivalent masses and stiffnesses of the disc cutter ring together with cutter body; tapered roller bearing and cutter shaft were presented. The mass and stiffness of the cutter were simulated by using the MATLAB software; and the vibration displacement of each part of the cutter was obtained. The simulated vibration displacement of each part of the cutter is consistent with the experimental results. The results show that the maximum vibration displacement of the cutter's ring and body is 2.8×10-4 m and the maximum vibration displacement of the bearing is 2.1×10-4 m. When the rigidity of the cutter's bearing increases by three times; the maximum vibration displacement of each part decreases by about 50%. When the rigidity of the cutter ring and body increases; the maximum vibration displacement of each part decreases by about 12%. To reduce the vibration of the disc cutter it needs to increase the rigidity of the bearing as well as the cutter ring and body. The results provide an effective method for the vibration measurement of disc cutters and have important significance for cutter design. © 2020; Editorial Office of Journal of Vibration and Shock. All right reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：201 / 206

共 50 条

[21] Study on Rock-breaking Simulation and Experiment of Double Disc Cutter of TBM
Lu, F.
Zhang, C.
Sun, J.
Tian, J. X.
Liu, M.
Wu, Y. H.
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2016, 23 : 80 - 88
[22] Disc cutter technology
T T Int, 4 (42):
[23] Analysis and calculation of optimum TBM disc cutter spacing
Feng, Huanhuan
Chen, Kui
Zhou, Jianjun
Li, Fengyuan
Wang, Zhufeng
Modern Tunnelling Technology, 2014, 51 (03) : 124 - 130
[24] The Simulation Analysis of the TBM Disc Cutter Phase Angle
Wang, Kai
Tan, Qing
Xia, Yimin
Xu, Zijun
INTELLIGENT ROBOTICS AND APPLICATIONS, PT I, 2010, 6424 : 348 - 355
[25] Analysis of thermal stress distribution of TBM disc cutter
Zhang Guiju
Xiao Caiyuan
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2018, 16 : 43 - 48
[26] Influence of joint characteristics on rock fragmentation induced by TBM disc cutter
Tan, Qing
Zhu, Yi
Xia, Yimin
Xu, Zijun
Li, Jianfang
Song, Junhua
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2013, 44 (10): : 4040 - 4046
[27] Design and Study on a Vertical Comprehensive Experimental Platform for Function between Disc Cutter and Rock
Feng, Huanhuan
Chen, Kui
Zhou, Jianjun
Li, Fengyuan
Wang, Zhufeng
ADVANCES IN APPLIED SCIENCE AND INDUSTRIAL TECHNOLOGY, PTS 1 AND 2, 2013, 798-799 : 361 - 364
[28] Design and Experiment of Directional Arrangement Vertical and Horizontal Cutting of Seed Potato Cutter
Wang X.
Zhu S.
Li X.
Li T.
Wang L.
Hu Z.
1600, Chinese Society of Agricultural Machinery (51): : 334 - 345
[29] Analysis of material motion characteristics of vertical nonlinear synchronous vibration dryer
Li, Xiaohao
Gao, Rui
Shen, Tao
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2019, 43 (04) : 560 - 568
[30] Failure analysis on the fracture of disc cutter in EPB shield machine
Fu, Jie
Xia, Yimin
Zhang, Ling
Lin, Laikuang
Zhang, Xiaoyun
Zhao, Shifang
ENGINEERING FAILURE ANALYSIS, 2020, 108

← 1 2 3 4 5 →