Analysis and experiment on the vertical vibration characteristics of a disc cutter

被引：0
|
作者：
Li, Jie [1 ]
Huang, Yuanjun [1 ]
Zhang, Bin [1 ]
Ma, Chao [1 ]
机构：
[1] College of Mechanical Engineering, Shijiazhuang Railway University, Shijiazhuang,050043, China
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2020年 / 39卷 / 09期
关键词：
The vertical vibration of a disc cutter has certain influence on the penetration and rock breaking efficiency of a full-face tunnel boring machine. In order to study the factors affecting the vertical vibration of cutter; a three-degree-of-freedom vertical vibration model for the disc cutter was established; and the equivalent masses and stiffnesses of the disc cutter ring together with cutter body; tapered roller bearing and cutter shaft were presented. The mass and stiffness of the cutter were simulated by using the MATLAB software; and the vibration displacement of each part of the cutter was obtained. The simulated vibration displacement of each part of the cutter is consistent with the experimental results. The results show that the maximum vibration displacement of the cutter's ring and body is 2.8×10-4 m and the maximum vibration displacement of the bearing is 2.1×10-4 m. When the rigidity of the cutter's bearing increases by three times; the maximum vibration displacement of each part decreases by about 50%. When the rigidity of the cutter ring and body increases; the maximum vibration displacement of each part decreases by about 12%. To reduce the vibration of the disc cutter it needs to increase the rigidity of the bearing as well as the cutter ring and body. The results provide an effective method for the vibration measurement of disc cutters and have important significance for cutter design. © 2020; Editorial Office of Journal of Vibration and Shock. All right reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：201 / 206
相关论文
共 50 条
  • [1] Establishment of TBM Disc Cutter Dynamic Model for Vertical Vibration
    Zhang, Kui
    Xia, Yi-min
    Tan, Qing
    Wang, Kai
    Yi, Nian-en
    INTELLIGENT ROBOTICS AND APPLICATIONS, PROCEEDINGS, 2009, 5928 : 374 - +
  • [2] Characteristics Analysis of TBM Disc Cutter Ring
    Wang, He
    Wu, Yuhou
    Sun, Hong
    Wang, Tengyue
    Zhao, Kaijun
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 219 - +
  • [3] Experiment and analysis of the rock breaking characteristics of disc cutter ring with small edge angle in high abrasive grounds
    Jie Li
    Yu-fei Nie
    Ke Fu
    Chao Ma
    Jing-bo Guo
    Ming-xin Xu
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [4] Experiment and analysis of the rock breaking characteristics of disc cutter ring with small edge angle in high abrasive grounds
    Li, Jie
    Nie, Yu-fei
    Fu, Ke
    Ma, Chao
    Guo, Jing-bo
    Xu, Ming-xin
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (10)
  • [5] Rock cutting performance and wear characteristics of undercutting disc cutter: Based on experiment and DEM
    Zhang, Xiaodi
    Jiang, Hongxiang
    Tian, Mingqian
    Li, Hongsheng
    Chen, Haibin
    WEAR, 2023, 528
  • [6] Vibration analysis and optimization of a vertical disc stump grinder
    Yao, Lihong
    Wang, Yingxuan
    Zeng, Zechen
    Kan, Jiangming
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (02):
  • [7] Design and experiment of the bionic disc cutter for kenaf harvesters
    Tian, Kunpeng
    Zhang, Bin
    Ji, Aimin
    Huang, Jicheng
    Liu, Haolu
    Shen, Cheng
    INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2023, 16 (06) : 116 - 123
  • [8] Vibration characteristics analysis of an aeroengine compressor disc
    Zhao, Weiqiang
    Liu, Yongxian
    ADVANCED RESEARCH ON MATERIALS, APPLIED MECHANICS AND DESIGN SCIENCE, 2013, 327 : 280 - 283
  • [9] Design and experiment of virtual prototype of double disc mower cutter
    Zhao, Manquan, 1600, Chinese Society of Agricultural Machinery (45):
  • [10] Boring mechanism and experiment research of ultrasonic vibration cutter
    Zhang, J.Z.
    Li, X.R.
    Duan, B.
    Hangkong Zhizao Jishu/Aeronautical Manufacturing Technology, 2001, (02):
12345