Shaking table tests of horizontal composite structure of reinforced concrete and timber frame

被引：0
|
作者：
机构：
[1] Nakagawa, Manabu
[2] Isoda, Hiroshi
[3] Kawai, Naohito
[4] Koshihara, Mikio
[5] Araki, Yasuhiro
来源：
Nakagawa, Manabu | 1600年 / Architectural Institute of Japan卷 / 79期
关键词：
Design method - Maximum acceleration - Reinforced concrete shear walls - Rigid frame - Seismic behavior - Shaking table tests - Structural safety - Timber floors;
D O I：
10.3130/aijs.79.401
中图分类号：
学科分类号：
摘要：
The horizontal composite structure consisting of reinforced concrete and timber frame was tested at full scale shaking table tests in parameters of specification of the floor and number of stories. After BCJ wave of maximum acceleration 350gal, no damage appeared in these structures with high eccentricity. The shear force of timber was reduced in both specimens of the timber floor and the RC slab. By comparison with test results, the design method that the shear force produced in timber frames is transmitted to the reinforced concrete shear wall was safety. As described in this study, it was confirmed through shaking tests that the method for building with high eccentricity can be designed with structural safety.
引用
收藏
相关论文
共 50 条
  • [21] Test Design and Finite Element Analysis of Shaking Table of Concrete Frame Structure Reinforced with CFRP Bars
    Wang, Jianyue
    Xu, Xinsheng
    2019 3RD INTERNATIONAL WORKSHOP ON RENEWABLE ENERGY AND DEVELOPMENT (IWRED 2019), 2019, 267
  • [22] Shaking table model test analysis of a reinforced concrete mega-frame structure without and with TMD
    Jiang, Q. (ahhfjq@163.com), 1600, Science Press (35):
  • [23] A shaking table test on steel-reinforced concrete composite tower
    Bai G.
    Hao B.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2019, 40 (12): : 32 - 40
  • [24] Shaking table tests for aseismic performance of a controllable rocking reinforced concrete frame with column-end-hinge joints
    Lu L.
    Jiang L.
    Li H.
    Lü X.-L.
    2016, Chinese Vibration Engineering Society (35): : 193 - 198and216
  • [25] Shaking table tests of 1:4 reduced-scale models of masonry infilled reinforced concrete frame buildings
    Zarnic, R
    Gostic, S
    Crewe, AJ
    Taylor, CA
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2001, 30 (06): : 819 - 834
  • [26] Shaking Table Tests on a Building with Brick- and Reinforced-Concrete Walls
    Beyer, K.
    Tondelli, M.
    Petry, S.
    BAUINGENIEUR, 2013, 88 : S2 - S7
  • [27] Shaking table tests of CFST reinforced concrete pier with hollow box section
    Yuan H.-H.
    She Z.-M.
    Wu Q.-X.
    Huang Y.-F.
    Chen K.-M.
    Gongcheng Lixue/Engineering Mechanics, 2021, 38 (12): : 200 - 213
  • [28] Shaking table tests on reinforced concrete frames without and with passive control systems
    Dolce, M
    Cardone, D
    Ponzo, FC
    Valente, C
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2005, 34 (14): : 1687 - 1717
  • [29] APPLICATION OF IDENTIFICATION METHODOLOGY TO SHAKING TABLE TESTS ON REINFORCED-CONCRETE COLUMNS
    LU, XL
    ENGINEERING STRUCTURES, 1995, 17 (07) : 505 - 511
  • [30] Shaking-table tests on reinforced concrete frames with different isolation systems
    Dolce, Mauro
    Cardone, Donatello
    Ponzo, Felice C.
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2007, 36 (05): : 573 - 596
12345