Microstructural analysis during the hydration of cement-in-polymer coatings

被引：3
|
作者：
Weichold O. [1 ]
Hojczyk M. [1 ]
Adams A. [2 ]
Olaru A. [2 ]
Stanjek H. [3 ]
机构：
[1] DWI An der RWTH Aachen E.V., Institute for Technical and Macromolecular Chemistry, RWTH Aachen University
[2] Institute for Technical and Macromolecular Chemistry, RWTH Aachen University
[3] Department of Clay and Interface Mineralogy, RWTH Aachen University
来源：
Key Engineering Materials | 2011年 / 466卷
关键词：
Hydration; Nuclear magnetic resonance; Polymer coating; Reinforced concrete; Scanning electron microscopy; X-ray diffraction;
D O I：
10.4028/www.scientific.net/KEM.466.159
中图分类号：
学科分类号：
摘要：
Cement-in-polymer (c/p) dispersions allow the full utilisation of the reinforcing abilities of multifilament rovings in concrete. In this work the role of the polymer properties on the performance of the c/p dispersions is investigated and discussed. Two model polymers are chosen and c/p dispersions made with these are investigated regarding the water ingress velocity (NMR), the phase development during cement hydration (XRD), and the microstructure after cement hydration (SEM). Best mechanical performance is achieved with the hydrophobic poly(vinyl acetate) which regulates the water ingress and causes a slow hydration of the cement. © (2011) Trans Tech Publications, Switzerland.
引用
收藏
页码：159 / 166
页数：7
相关论文
共 50 条
  • [21] Simulation of the hydration kinetics and elastic moduli of cement mortars by microstructural modelling
    Valentini, Luca
    Parisatto, Matteo
    Russo, Vincenzo
    Ferrari, Giorgio
    Bullard, Jeffrey W.
    Angel, Ross J.
    Dalconi, Maria C.
    Artioli, Gilberto
    CEMENT & CONCRETE COMPOSITES, 2014, 52 : 54 - 63
  • [22] Microstructural development of early age hydration shells around cement grains
    Gallucci, E.
    Mathur, P.
    Scrivener, K.
    CEMENT AND CONCRETE RESEARCH, 2010, 40 (01) : 4 - 13
  • [23] Influence of curing temperature on hydration and microstructural development of ordinary Portland cement
    Emmanuel, Arun C.
    Krishnan, Sreejith
    Bishnoi, Shashank
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 329
  • [24] Effects of super absorbent polymer on the early hydration of Portland cement highlighted by thermal analysis
    Guofang Zhang
    Yawen Wang
    Rui He
    Peiming Wang
    Journal of Thermal Analysis and Calorimetry, 2017, 129 : 45 - 52
  • [25] Hydration kinetics and microstructural development of a magnesium oxysulfate cement modified by macromolecules
    Barbieri, Virginia
    Gualtieri, Magdalena Lassinantti
    Manfredini, Tiziano
    Siligardi, Cristina
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 248
  • [26] Effects of super absorbent polymer on the early hydration of Portland cement highlighted by thermal analysis
    Zhang, Guofang
    Wang, Yawen
    He, Rui
    Wang, Peiming
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2017, 129 (01) : 45 - 52
  • [27] INTERACTION OF POLYMERS WITH PORTLAND-CEMENT DURING HYDRATION - A STUDY OF THE CHEMISTRY OF THE PORE SOLUTION OF POLYMER-MODIFIED CEMENT SYSTEMS
    LARBI, JA
    BIJEN, JMJM
    CEMENT AND CONCRETE RESEARCH, 1990, 20 (01) : 139 - 147
  • [28] MECHANISM OF ACTION OF SUPERPEPTIZERS DURING CEMENT HYDRATION
    LUKYANOVICH, VM
    NESPOVITAYA, TP
    SHAPKAITS, VI
    DORKIN, VV
    CHUMAKOV, YM
    ZHURNAL VSESOYUZNOGO KHIMICHESKOGO OBSHCHESTVA IMENI D I MENDELEEVA, 1982, 27 (03): : 351 - 353
  • [29] Drying/hydration in cement pastes during curing
    D. P. Bentz
    K. K. Hansen
    H. D. Madsen
    F. Vallée
    E. J. Griesel
    Materials and Structures, 2001, 34 : 557 - 565
  • [30] ULTRASONIC CHARACTERIZATION OF CEMENT COMPOSITES DURING HYDRATION
    Gabrijel, Ivan
    Mikulic, Dunja
    Bijelic, Nenad
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2010, 17 (04): : 493 - 497
12345