Interfacial reactions between Sn-3.5Ag solder and electroless Ni-P during soldering and aging

被引：0
|
作者：
Huang, Ming-Liang [1 ,2 ]
Bai, Dong-Mei [1 ,2 ]
机构：
[1] School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
[2] Key Laboratory of Liaoning Advanced Welding and Joining Technology, Dalian University of Technology, Dalian 116024, China
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2010年 / 20卷 / 06期
关键词：
Binary alloys - Growth kinetics - Lead-free solders - Soldering;
D O I：
暂无
中图分类号：
TG457 [各种金属材料和构件的焊接];
学科分类号：
摘要：
The wetting behavior of Sn-3.5Ag solder on the electroless Ni-P film with 6.5% P (mass fraction) during soldering and the interfacial reactions between Sn-3.5Ag solder and electroless Ni-6.5% P during soldering and aging were investigated. The results show that the wetting angle is about 44° and the spreading coefficient is about 67% using the solder balls with diameter of (2.3±0.06) mm at 25°C. The soldering interface are composed of a Ni3Sn4 IMC layer, a thinner Ni-Sn-P layer and a Ni3P crystallization layer between Sn-3.5Ag solder and electroless Ni-P. The growth kinetics of the interfacial IMC Ni3Sn4 during soldering follows a linear relation with cubic root of soldering time. The growth kinetics of interfacial IMC Ni3Sn4 and P-enriched layer during aging obeys a linear relation with square root of aging time.
引用
收藏
页码：1189 / 1194
相关论文
共 50 条
  • [1] Study of the Interfacial Reaction between the Sn-3.5Ag Solder and Electroless Ni-P Metallization
    Yang, Guangyu
    MACHINERY ELECTRONICS AND CONTROL ENGINEERING III, 2014, 441 : 19 - 21
  • [2] Interfacial reaction of electroless Ni-P plating with Sn-3.5Ag (-Co) solder
    Nishikawa, Hiroshi
    Komatsu, Akira
    Takemoto, Tadashi
    ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 243 - 246
  • [3] Morphology and kinetic study of the interfacial reaction between the Sn-3.5Ag solder and electroless Ni-P metallization
    Zhong Chen
    Min He
    Guojun Qi
    Journal of Electronic Materials, 2004, 33 : 1465 - 1472
  • [4] Morphology and kinetic study of the interfacial reaction between the Sn-3.5Ag solder and electroless Ni-P metallization
    Chen, Z
    He, M
    Qi, GJ
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (12) : 1465 - 1472
  • [5] Effect of electromigration on interfacial reactions between electroless Ni-P and Sn-3.5% Ag solder
    Kumar, A
    He, M
    Chen, Z
    Teo, PS
    THIN SOLID FILMS, 2004, 462 : 413 - 418
  • [6] Effect of Ni-P thickness on solid-state interfacial reactions between Sn-3.5Ag solder and electroless Ni-P metallization on Cu substrate
    Kumar, A
    Chen, Z
    Mhaisalkar, SG
    Wong, CC
    Teo, PS
    Kripesh, V
    THIN SOLID FILMS, 2006, 504 (1-2) : 410 - 415
  • [7] TEM study on the interfacial reaction between electroless plated Ni-P/Au UBM and Sn-3.5Ag solder
    Park, Min-Ho
    Kwon, Eun-Jung
    Kang, Han-Byul
    Jung, Seung-Boo
    Yang, Cheol-Woong
    METALS AND MATERIALS INTERNATIONAL, 2007, 13 (03) : 235 - 238
  • [8] Effect of electric current on the mechanical properties and interfacial microstructure of Ni-P/Sn-3.5Ag and Ni/Sn-3.5Ag solder joints
    Kumar, Aditya
    Chen, Zhong
    Wong, C. C.
    Mhaisalkar, S. G.
    Kripesh, Vaidhyanathan
    EPTC 2006: 8TH ELECTRONIC PACKAGING TECHNOLOGY CONFERENCE, VOLS 1 AND 2, 2006, : 203 - 210
  • [9] Influence of phosphorus content on the interfacial microstructure between Sn-3.5Ag solder and electroless Ni-P metallization on Cu substrate
    Mona, M
    Kumar, A
    Chen, Z
    PROCEEDINGS OF THE 7TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, VOLS. 1 AND 2, 2005, : 503 - 508
  • [10] Influence of solid-state interfacial reactions on the tensile strength of Cu/electroless Ni-P/Sn-3.5Ag solder joint
    Kumar, Aditya
    Chen, Zhong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 423 (1-2): : 175 - 179
12345