Study of poly (3, 4-ethylene dioxythiophene):Poly (styrene sulfonate) by in-situ resonance Raman spectroscopy

被引:0
|
作者
Lin, Hai-Bo [1 ]
Xu, Xiao-Xuan [1 ]
Wang, Bin [1 ]
Wu, Bin-Lin [1 ]
Xu, Jia-Lin [1 ]
Yu, Gang [1 ]
Zhang, Cun-Zhou [1 ]
机构
[1] TEDA Applied Physics School, Nankai University, Tianjin 300457, China
关键词
D O I
暂无
中图分类号
学科分类号
摘要
Poly (3,4-ethylene dioxythiophene) (PEDOT):Poly (styrene sulfonate) (PSS) has attracted a lot of interest for application in organic electronics due to good stability and high electronic conductivity in its doped state. Indeed, thin layers of PEDOT:PSS was regularly used in light emitting diodes (PLEDs) as hole injection and transportation layer. Here, Doping and dedoping states of PEDOT:PSS were studied by absorbance spectra and Raman spectra. A new absorption band centered at 620 nm was observed on dedoped PEDOT:PSS. Consistently, Raman signals of dedoped PEDOT:PSS are resonantly intensified since the Raman excitation wavelength (633 nm) is set in the enhanced absorption band. So it gives a sensitive way to study the doping and dedoping states of PEDOT:PSS. Furthermore, for the encapsulated polymer light-emitting diodes, Raman spectroscopy is a powerful way to study the polymer layers inside the devices.
引用
下载
收藏
页码:646 / 648
相关论文
共 50 条
  • [31] A simple poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonic acid) transistor for glucose sensing at neutral pH
    Zhu, ZT
    Mabeck, JT
    Zhu, CC
    Cady, NC
    Batt, CA
    Malliaras, GG
    CHEMICAL COMMUNICATIONS, 2004, (13) : 1556 - 1557
  • [32] New conductive adhesive based on poly(3,4-ethylene dioxythiophene)
    Bouguettaya, M.
    Vedie, N.
    Chevrot, C.
    Synthetic Metals, 1999, 102 (1 -3 pt 2): : 1428 - 1431
  • [33] Stability of Poly(3,4-ethylene dioxythiophene) Materials Intended for Implants
    Thaning, Elin M.
    Asplund, Maria L. M.
    Nyberg, Tobias A.
    Inganas, Olle W.
    von Hoist, Hans
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2010, 93B (02) : 407 - 415
  • [34] New conductive adhesive based on poly(3,4-ethylene dioxythiophene)
    Bouguettaya, M
    Vedie, N
    Chevrot, C
    SYNTHETIC METALS, 1999, 102 (1-3) : 1428 - 1431
  • [35] Modification of ionization potential of poly(ethylene dioxythiophene): Poly(styrene sulfonate) film by acid or base treatment
    Nishino, Shunsuke
    Okada, Jun
    Kumazawai, Kinya
    Mori, Tatsuo
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2007, 46 (11): : 7427 - 7431
  • [36] Paper-based supercapacitor with screen-printed poly (3, 4-ethylene dioxythiophene)-poly (styrene sulfonate)/multiwall carbon nanotube films actuating both as electrodes and current collectors
    Klem, Maykel dos Santos
    Morais, Rogerio Miranda
    Goncalves Rubira, Rafael Jesus
    Alves, Neri
    THIN SOLID FILMS, 2019, 669 (96-102) : 96 - 102
  • [37] Silver nanoparticles doped poly(3, 4-ethylene dioxythiophene) on titania nanotubes for orthopaedic application
    Sudhisha, V.
    Saranya, K.
    Kalaiyarasan, M.
    Rajendran, N.
    APPLIED SURFACE SCIENCE, 2023, 610
  • [38] A new green-to-transmissive polymer with electroactive poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) as an interface layer for achieving high-performance electrochromic device
    Lv, Xiaojing
    Bi, Qian
    Tameev, Alexey
    Zhang, Yujian
    Qian, Liang
    Ouyang, Mi
    Zhang, Cheng
    JOURNAL OF POLYMER SCIENCE, 2020, 58 (07) : 937 - 947
  • [39] Low-temperature seeding and hydrothermal growth of ZnO nanorod on poly(3,4-ethylene dioxythiophene):poly(styrene sulfonic acid)
    Ding, Yichun
    Zheng, Fan
    Zhu, Zhengtao
    MATERIALS LETTERS, 2016, 183 : 197 - 201
  • [40] Gas sensitivity of poly (3, 4-ethylene dioxythiophene) prepared by a modified LB film method
    Huajing Zheng
    Yadong Jiang
    Jianhua Xu
    Yajie Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26 : 70 - 74