Stress-induced martensite transformation and mechanical properties of fine-grained Ti-10V-2Fe-3Al alloy fabricated by friction stir processing

被引：0
|
作者：
Li, Pengbo [1 ]
Wang, Kai [2 ]
Chu, Shaoyang [3 ]
Liu, Guanqi [1 ]
机构：
[1] Central Laboratory, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing K
[2] School of Materials Science and Engineering, Beihang University, Beijing,100191, China
[3] National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing,100081, China
来源：
Materials Science and Engineering: A | 2024年 / 918卷
基金：
中国国家自然科学基金;
关键词：
Aerospace industry - Age hardening - Grain refinement - Iron alloys - Strain hardening - Vanadium alloys;
D O I：
10.1016/j.msea.2024.147416
中图分类号：
学科分类号：
摘要：
Ti-10 V-2Fe-3Al, as the metastable β-type titanium alloy, has several applications in the aerospace industry due to its good mechanical properties. However, the study of stress-induced martensitic transformation behavior and corresponding mechanical properties in its small-sized grains ( © 2024 Elsevier B.V.
引用
收藏
相关论文
共 50 条
  • [41] Effect of high strain rate beta processing on microstructure and mechanical properties of near- titanium alloy Ti-10V-2Fe-3Al
    Skubisz, P.
    Lisiecki, L.
    Packo, M.
    Skowronek, T.
    Micek, P.
    Tokarski, T.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2018, 232 (03) : 181 - 190
  • [42] EFFECT OF HEAT TREATMENT CONDITIONS ON THE MORPHOLOGY OF α PHASE AND MECHANICAL PROPERTIES IN Ti-10V-2Fe-3Al TITANIUM ALLOY
    Bogucki, R.
    Mosor, K.
    Nykiel, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (04) : 1269 - 1273
  • [43] Effect of cold rolling deformation on the microstructure and properties of Ti-10V-2Fe-3Al alloy
    Qi, Lichun
    Qiao, Xueliang
    Huang, Lijun
    Huang, Xu
    Xiao, Wenlong
    Zhao, Xinqing
    MATERIALS CHARACTERIZATION, 2019, 155
  • [44] Deformation-Induced Grain Refinement and Amorphization in Ti-10V-2Fe-3Al Alloy
    Chen, Wei
    Sun, Qiaoyan
    Xiao, Lin
    Sun, Jun
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (01): : 316 - 326
  • [45] Application of novel technique to examine thermomechanical processing of near ß alloy Ti-10V-2Fe-3Al
    Jackson, M
    Dashwood, RJ
    Christodoulou, L
    Flower, HM
    MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (11-12) : 1437 - 1444
  • [46] Thermal stability of bulk nanocrystalline Ti-10V-2Fe-3Al alloy
    Chen, Wei
    Sun, Qiaoyan
    Xiao, Lin
    Sun, Jun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 536 : 223 - 230
  • [47] MACHINABILITY OF β-TITANIUM ALLOY TI-10V-2FE-3AL WITH DIFFERENT MICROSTRUCTURES
    Machai, Christian
    Abrahams, Hendrik
    Biermann, Dirk
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, 2012, : 919 - 926
  • [48] THE EFFECT OF HEAT-TREATMENT ON THE MECHANICAL-PROPERTIES OF TI-10V-2FE-3AL
    TOYAMA, K
    MAEDA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (06): : 617 - 624
  • [49] Cyclic behaviour and fatigue damage of Ti-10V-2Fe-3Al alloy
    Luquiau, D
    Feaugas, X
    Clavel, M
    Campagnac, MH
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1996, 93 (09): : 1111 - 1124
  • [50] Effect of stress ratio on very high cycle fatigue properties of Ti-10V-2Fe-3Al alloy with duplex microstructure
    Ying Wu
    Jianrong Liu
    Hao Wang
    Shaoxuan Guan
    Rui Yang
    Hongfu Xiang
    Journal of Materials Science & Technology, 2018, 34 (07) : 1189 - 1195
12345