Stress-induced martensite transformation and mechanical properties of fine-grained Ti-10V-2Fe-3Al alloy fabricated by friction stir processing

被引：0
|
作者：
Li, Pengbo [1 ]
Wang, Kai [2 ]
Chu, Shaoyang [3 ]
Liu, Guanqi [1 ]
机构：
[1] Central Laboratory, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing K
[2] School of Materials Science and Engineering, Beihang University, Beijing,100191, China
[3] National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing,100081, China
来源：
Materials Science and Engineering: A | 2024年 / 918卷
基金：
中国国家自然科学基金;
关键词：
Aerospace industry - Age hardening - Grain refinement - Iron alloys - Strain hardening - Vanadium alloys;
D O I：
10.1016/j.msea.2024.147416
中图分类号：
学科分类号：
摘要：
Ti-10 V-2Fe-3Al, as the metastable β-type titanium alloy, has several applications in the aerospace industry due to its good mechanical properties. However, the study of stress-induced martensitic transformation behavior and corresponding mechanical properties in its small-sized grains ( © 2024 Elsevier B.V.
引用
收藏
相关论文
共 50 条
  • [1] Superplastic behavior of fine-grained Ti-10V-2Fe-3Al alloy fabricated by friction stir processing
    Wang, Kai
    Zhang, Wenjing
    Ogura, Takuya
    Morisada, Yoshiaki
    Zhao, Xinqing
    Fujii, Hidetoshi
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2025, 206 : 26 - 36
  • [2] FORMATION AND REVERSION OF STRESS-INDUCED MARTENSITE IN TI-10V-2FE-3AL
    DUERIG, TW
    ALBRECHT, J
    RICHTER, D
    FISCHER, P
    ACTA METALLURGICA, 1982, 30 (12): : 2161 - 2172
  • [3] Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy
    Rastogi, Abhishek
    Kalyan, Dova
    Makineni, Surendra Kumar
    Neelakantan, Suresh
    MATERIALS CHARACTERIZATION, 2024, 207
  • [4] COLD-ROLLING PROPERTY AND STRESS-INDUCED TRANSFORMATION IN TI-10V-2FE-3AL
    MAEDA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1644 - 1644
  • [5] Influence of aging processing on microstructure and mechanical properties of ti-10v-2fe-3al alloy
    Shang, Guoqiang
    Kou, Hongchao
    Fei, Yue
    Chang, Hui
    Zhu, Zhishou
    Wang, Xinnan
    Zhang, Fengshou
    Li, Jinshan
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2010, 39 (06): : 1061 - 1065
  • [6] Stress-induced martensitic transformation in a β-solution treated Ti-10V-2Fe-3Al alloy during compressive deformation
    Ma, Xinkai
    Chen, Zhuo
    Xiao, Lei
    Luo, Shifeng
    Lu, Wenjie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 801
  • [7] EFFECT OF β-FLECKS ON MECHANICAL PROPERTIES OF Ti-10V-2Fe-3Al ALLOY
    ZHOU Yigang YU Hanqing ZENG Weidong Northwestern Polytechnical University
    Acta Metallurgica Sinica(English Letters), 1993, (03) : 197 - 201
  • [8] Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al
    Li, C.
    Wu, X.
    Chen, J. H.
    van der Zwaag, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18): : 5854 - 5860
  • [9] Effect of structural stability on the stress induced martensitic transformation in Ti-10V-2Fe-3Al alloy
    Qi, Lichun
    Qiao, Xueliang
    Huang, Lijun
    Huan, Xu
    Zhao, Xinqing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 756 : 381 - 388
  • [10] Effect of hot compressive deformation on the martensite transformation of Ti-10V-2Fe-3Al titanium alloy
    Lei, Liming
    Huang, Xu
    Wang, Minmin
    Wang, Liqiang
    Qin, Jining
    Li, Hongping
    Lu, ShiQiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 591 - 601
12345