A comparative study on the Lattice Boltzmann Method and the VoF-Continuum method for oxygen transport in the anodic porous transport layer of an electrolyzer

The optimization of Polymer Electrolyte Membrane (PEM) electrolyzers necessitates an intimate knowledge of the oxygen flows within the anodic porous transport layers (PTLs) to determine any possible reduction in performance. In this field, as experimental studies are cumbersome and expensive, numerical modeling has arisen as a viable alternative for studying the oxygen transport within the Anodic PTLs of a PEM electrolyzer. Amongst the various numerical modeling techniques, the Lattice Boltzmann Method (LBM) is gaining prominence for its effectiveness in analyzing fluid transport within porous media due to its mesoscopic nature and ease of implementation. This study utilizes the Shan-Chen LBM methodology to model the flow of oxygen within the Anodic PTL of a PEM electrolyzer and compares it against the Volume-of-Fluid-based Continuum Model. The results show that LBM can not only replicate the experimental studies accurately, but can also maintain its high accuracy at progressively shrinking length scales of PTLs, even at length scales where the VoF-based Continuum Model would run into accuracy issues. The high accuracy of the LBM model, combined with the simplicity of the LB algorithm makes LBM a powerful technique for simulating the microfluidic flows such as the flow of oxygen within the Anodic PTL of a PEM electrolyzer. © 2024 Hydrogen Energy Publications LLC