KrF excimer laser-assisted combustion-flame deposition of diamond films

被引：0
|
作者：
Han, Y.X. [1 ]
Ling, H. [1 ]
Lu, Y.F. [1 ]
机构：
[1] Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511
来源：
Journal of Applied Physics | 2006年 / 100卷 / 12期
关键词：
Cobalt (Co) composition has detrimental effects on the deposition of diamond films on cemented tungsten carbide (WC-Co) substrates. It decreases adhesion of the deposited films to the substrates and causes a transformation of s p3 -bonded diamond to s p2 -bonded graphite. In this study; a KrF excimer laser with a wavelength of 248 nm; a pulse width of 23 ns; and a pulse energy range of 84-450 mJ was used in the combustion-flame method to improve the quality of the deposited diamond films. Scanning electron microscopy; energy dispersive x-ray analysis; and Raman spectroscopy of the deposited films showed that a laser irradiation during combustion-flame deposition of diamond decreased the cobalt composition drastically. Based on the experimental results; the influence of the laser irradiation on the deposition process was analyzed. © 2006 American Institute of Physics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] KrF excimer laser-assisted combustion-flame deposition of diamond films
    Han, Y. X.
    Ling, H.
    Lu, Y. F.
    [J]. JOURNAL OF APPLIED PHYSICS, 2006, 100 (12)
  • [2] CO2 laser-assisted local deposition of diamond films by combustion-flame method
    Ling, H.
    Han, Y. X.
    Lu, Y. F.
    [J]. LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY, 2007, 6459
  • [3] Characterization of diamond thin films deposited by a CO2 laser-assisted combustion-flame method
    McKindra, Travis
    O'Keefe, Matthew J.
    Xie, Zhiqiang
    Lu, Yongfeng
    [J]. MATERIALS CHARACTERIZATION, 2010, 61 (06) : 661 - 667
  • [4] Excimer laser-assisted planarization of thick diamond films
    Singh, RK
    Lee, DG
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 1996, 25 (01) : 137 - 142
  • [5] GROWTH OF DIAMOND FILMS USING AN ENCLOSED COMBUSTION-FLAME
    MORRISON, PW
    SOMASHEKHAR, A
    GLASS, JT
    PRATER, JT
    [J]. JOURNAL OF APPLIED PHYSICS, 1995, 78 (06) : 4144 - 4156
  • [6] STUDIES OF DIAMOND FILMS CRYSTALS SYNTHESIZED BY OXYACETYLENE COMBUSTION-FLAME TECHNIQUE
    ZHU, W
    TAN, BH
    AHN, J
    TAN, HS
    [J]. JOURNAL OF MATERIALS SCIENCE, 1995, 30 (08) : 2130 - 2138
  • [7] Synthesis of diamond on WC-Co substrates using a KrF excimer laser in combination with a combustion flame
    Han, Y. X.
    Ling, H.
    Lu, Y. F.
    [J]. LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY, 2007, 6459
  • [8] Structural dependence of combustion-flame synthesized diamond films on substrate temperatures
    Takahashi, H
    Després, JF
    Odawara, O
    [J]. JOURNAL OF APPLIED PHYSICS, 1999, 85 (07) : 3609 - 3613
  • [9] Pulsed laser deposition of hydroxyapatite films by KrF excimer
    Torrisi, L
    Trusso, S
    Di Marco, G
    Parisi, P
    [J]. PHYSICA MEDICA, 2001, 17 (04) : 227 - 231
  • [10] Growth and orientation of diamond crystal thin films obtained by the combustion-flame method
    Paulmier, D
    LeHuu, T
    Zaidi, H
    [J]. SURFACE SCIENCE, 1997, 377 (1-3) : 866 - 870
12345