Thermoplastic elastomers based on epoxidized natural rubber and high-density polyethylene blends: Effect of blend compatibilizers on the mechanical and morphological properties

被引：0
|
作者：
Nakason, Charoen [1 ]
Jarnthong, Methakarn [1 ]
Kaesaman, Azizon [1 ]
Kiatkamjornwong, Suda [2 ]
机构：
[1] Department of Rubber Technology and Polymer Science, Center of Excellence in Natural Rubber Technology, Prince of Songkla University, Pattani 94000, Thailand
[2] Multidisciplinary Program of Petrochemistry and Polymer Science, Faculty of Science, Chulalongkorn University, Bangkok 10330, Thailand
来源：
Journal of Applied Polymer Science | 2008年 / 109卷 / 04期
关键词：
Epoxidized natural rubber (ENR) with a level of epoxide groups of 20 mol % was prepared via the performic epoxidation method. It was then used to blend with high-density polyethylene (HDPE) at various blend ratios. Three types of blend compatibilizers were prepared. These included a graft copolymer of HDPE and maleic anhydride (MA; i.e; HDPE-g-MA) and two types of phenolic modified HDPEs using phenolic resins SP-1045 and HRJ-10518 (i.e; PhSP-PE and PhHRJ-PE); respectively. We found that the blend with compatibilizer exhibited superior tensile strength; hardness; and set properties to that of the blend without compatibilizer. The ENR and HDPE interaction via the link of compatibilizer molecules was the polar functional groups of the compatibilizer with the oxirane groups in the ENR molecules. Also; another end of the compatibilizer molecules (i.e; HDPE segments) was compatibilizing with the HDPE molecules in the blend components. The blend with compatibilizer also showed smaller phase morphology than the blend without compatibilizer. Among the three types of the blend compatibilizer; HDPE-g-MA provided the blend with the greatest strength and hardness properties but the lowest set properties. © 2008 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：2694 / 2702
相关论文
共 50 条
  • [41] Mechanical properties and blend compatibility of natural rubber-chlorosulfonated polyethylene blends
    Tanrattanakul, V
    Petchkaew, A
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 99 (01) : 127 - 140
  • [42] Thermoplastic elastomers-based natural rubber and thermoplastic polyurethane blends
    Pichaiyut, Skulrat
    Nakason, Charoen
    Vennemann, Norbert
    IRANIAN POLYMER JOURNAL, 2012, 21 (01) : 65 - 79
  • [43] Thermoplastic elastomers-based natural rubber and thermoplastic polyurethane blends
    Skulrat Pichaiyut
    Charoen Nakason
    Norbert Vennemann
    Iranian Polymer Journal, 2012, 21 : 65 - 79
  • [44] Effect of particulate fillers on natural rubber/high-density polyethylene blends for roofing application
    Wickramaarachchi, W. V. W. H.
    Walpalage, S.
    Egodage, S. M.
    POLYMERS & POLYMER COMPOSITES, 2021, 29 (06): : 763 - 769
  • [45] Mechanical, thermal and morphological properties of poly( lactic acid)/epoxidized natural rubber blends
    Bijarimi, Mohd
    Ahmad, Sahrim
    Rasid, Rozaidi
    JOURNAL OF ELASTOMERS AND PLASTICS, 2014, 46 (04): : 338 - 354
  • [46] Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio
    Mohamad, N.
    Zainol, N. S.
    Rahim, F. F.
    Ab Maulod, Hairul Effendy
    Abd Rahim, Toibah
    Shamsuri, Siti Rahmah
    Azam, M. A.
    Yaakub, M. Y.
    Bin Abdollah, Mohd Fadzli
    Abd Manaf, Mohd Edeerozey
    INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 2013, 68 : 439 - 445
  • [47] Failure properties of thermoplastic elastomers from polyethylene/nitrile rubber blends: Effect of blend ratio, dynamic vulcanization, and filler incorporation
    George, J
    Neelakantan, NR
    Varughese, KT
    Thomas, S
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (04) : 2912 - 2929
  • [48] Thermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological Properties.
    Lamlaeh, Suwaiyah
    Kaesaman, Azizon
    Nakason, Charoen
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 66 - 70
  • [49] Failure properties of thermoplastic elastomers from polyethylene/nitrile rubber blends: Effect of blend ratio, dynamic vulcanization, and filler incorporation
    George, Josephine
    Neelakantan, N.R.
    Varughese, K.T.
    Thomas, Sabu
    Journal of Applied Polymer Science, 2006, 100 (04): : 2912 - 2929
  • [50] Dynamic mechanical properties of high density polyethylene and nitrile rubber blends: Effect of blend ratio, compatibilization and filler incorporation
    George, J
    Neelakantan, NR
    Varughese, KT
    Thomas, S
    RUBBER CHEMISTRY AND TECHNOLOGY, 2005, 78 (02): : 286 - 311
12345